60A MPPT Solar Regulator Charge Controller DC12/24/36/48V Auto Max PV 190V LCD

Description: 60A MPPT Solar Regulator Charge Controller DC12/24/36/48V Auto Max PV 190V LCD 60A MPPT Solar Panel Regulator Charge Controller DC12/24/36/48V Auto Max PV 190V Abvantages:❶【Software Update Version】100% MPPT 60A solar charge controller Intelligent, Max efficiency ≥98.1%, PV utilization ≥99%.Built-in DSP controller with high-performance Automatic battery voltage detection 12V/24V/36V/48V, Make sure the battery's voltage is more than 12V to boost the controller and make sure the battery has enough power to Self-detection when connected to the controller. ❷Fit for USER(can be set Lithium, Lifepo4, Li(NiCoMn)O2)/Vented/Flooded/Sealed/Gel/NiCd battery.The user is programmable for absorption voltage/Floating voltage/Low voltage disconnect./Load Timer. Real-time energy recording. ❸Blacklight LCD Display PV voltage/output power/Battery voltage/charging current/working mode/Temperature, ☀ TROUBLESHOOTING function and LCD display and can help users not only check the whole system operating data and statuses but also quickly identify system faults and modify parameters. ❹Intelligence Fan-on temperature >45℃ and off < 40℃, Porous heat dissipation.and fan use BEARING technologies increase life UP TO 5000hrs in normal use. ❺【What You Get】we consider that the larger diameter of the wire will be a greater cost for customers, so we designed two connectors for each pos and negs on solar and batteries connectors. copper wires:9AWG.Hope you love it. Feature: Charging 3-stage: constant current(MPPT), constant voltage(Absorption Voltage), floating chargeSelectable battery type Vented / Sealed / Gel / NiCd / Lithium battery (default is Sealed) (defined voltage for other battery by user)Soft start time ≤1S, Dynamic response and recovery time 100usMax efficiency ≥98.1%, PV utilization ≥99%In order to reduce the cost of electricity caused by high current, PV and battery each have two terminalsMULTIPLE ELECTRONIC PROTECTIONSShort-circuitingReverse-currentOverchargingOverloadOver-dischargingReverse polarity protection Notes: The output terminal is for lamp only( 12V system less 60W, 24V/36V/48V system less 100W ), and it will be burnt if connected to other loads. The output for the battery is no polarity reverse protection. Remarks: 1. The maximum PV input voltage (Voc): DC160V (The controller can not work with this long-duration voltage, which will interrupt the controller. Refer to the input voltage of PV). 2. The output port is only for lamps (12V system less 60W, 24V/36V/48V system less 100W) and will be burned if connected to other loads. The battery output is not reverse polarity protection. 3. Always connect the battery first!!! Make sure the battery voltage is sufficient for the controller to recognize the correct system voltage. The order of dismantling contradicts the order of wiring. 4. Do not connect any inverter/wind/generator or charger to the controller, please connect the inverter to the battery side. 5. Ensures the solar input voltage exceeds 3V or more than the battery voltage and the total input power exceeds the max. , the charging current is almost zero when the controller has a trickle charge.ParameterModel NameMPPT-60ACharging modeMPPT Maximum power point tracking automaticallyCharging3-stage:constant current(MPPT), constant voltage(Absorption Voltage), floating chargeSystem typeDC12V/24V/36V/48V Recognition automaticallySystem voltage automatic recognition12V system (DC9V-DC15V)24V system (DC18V-DC29V)36V system (DC30V-DC39V)48V system (DC40V~DC60V)Soft start time≤1SDynamic response and recovery time≥98.1% (Voc is 1.5 or 2 times than battery, then it’s best efficiency)PV utilization≥99%Input specificationVoc from PV( Make sure the Voc of PVmeeting the requirement as right. Voc is 1.5 or 2 times than battery, then it’s best efficiency. )12V system (DC20V~DC80V)24V system (DC37V~DC105V)36V system (DC50V~DC160V)48V system (DC72V~DC160V)The maximum PV input voltage (Voc)DC190V(The controller can’t work at this voltage of long duration that will break controller. Please refer to Input voltage from PV.)The maximum PV input power(The total power rated of PV can’t be over this watt that will break the controller.)12V system (720W)24V system (1440W)36V system (2100W)48V system (2800W)Output specificationSelectable battery type(default is Sealed)Vented/ Sealed / Gel / NiCd / Lithium battery(defined voltage for other battery by user)Absorption Charging VoltageRefer to Batteries charging referenceFloating Charging VoltageRefer to Batteries charging referenceOvercharging protection voltage12V system (15V)24V system (30V)36V system (45V)48V system (60V)Rated output current60ATemperature Coefficient±0.02%/ centi-degreeAutomatic temperature compensation14.2V-(Max temperature-25 centi-degree)*0.3Output voltage ripple-peak100mVOutput voltage accurac≤±1%Input Anti-intrusion protectionyesTemperature Protection75°CTemperature increased protectionOutput power will reduce when it’s more 70 °COutput power will be normal when it’s less 55 °CFan-on temperature>40 °CFan-off temperature<35 °CAcoustic noise≤40dBCooling wayForced air coolingComponentsImported materials, according to EU standards, Industrial grade range.Environmental requirementsMeet 2002/95/EC; No cadmium, hydrides, and fluoridesSecurity LevelAccording to CE, PSE, FCC, EMC, EN60950Electromagnetic CompatibilityAccord to EN61000, EN55022, EN55024EnclosureIP21Net weight(Kg)1.1Gross weight(Kg)1.2 COPPER COILSTrue MPPT controller, The Three copper coils play step-down roles to make your system work more stable. TRANSFORMERThree Electronic transformers, more safeMULTIPLE ELECTRONIC PROTECTIONS: Short-circuitingReverse-currentOverchargingOverloadOver-dischargingReverse polarity protectionFAN COOLING Good Heat dissipationIntelligence Fan-on temperature >45℃ and off < 40℃, let your controller feel cooling.Fan use BEARING technologies increase life UP TO 5000hrs in normal use. TipsAlways connect the battery first!!! Making, sure enough, the batteries’ voltage let the controller recognize the right system voltage. The disassembly sequence is contrary to the wiring order. NEVER connect the solar panel array to the controller without a batteryDO NOT connect any Inverter/ wind/ Alternator or Charger to the charge controller! connect the Inverter directly to the battery.Ensures solar input voltage is higher than 3V or more than batteries’ voltage and total input power in the range. if the input power is too low for max input power, it may appear to have been discontinued., the charging current almost is zero when the controller is floating charge.Parameter Setting Rules： Floating voltage > Low voltage reconnect > Low voltage discharge.The solar controller will stop output when the battery is under 10.7V. The LCD will be blank when the battery is under 8V and it will re-output when the battery is up to 12.6V (adjustable).Install the Charger controller to the battery as closely as possible. Tighten the wire, Carefully read battery manuals before operation.When the controller makes a buzzing sound It's working hard to dissipate heat for the controller. Rest your heart, it will stop when the temperature returns to normal.Remove all the debris around the controller ( leaving a space of approx. 5.91in ). Make sure all connections going into and from the controller are tight. Do NOT let the positive (+) and negative (-) terminals of the battery touch each other. Package includes1x 60A MPPT solar controller 1x user manual 4x Mounting caps 4x ScrewsAbout USDelivery DetailsTerms of salesContact usDelivery WorldwideAbout US Delivery Details Our warehouses are located in California, we will ship goods out for you within 24 hours. We offers a variety of shipping methods such as USPS, UPS, FEDEX. 1. Shipment Time: Your order will be sent out WITHIN THE HANDLING TIME.HANDLING TIME are based on 1 business days (Monday to Friday) excluding Holidays and weekends. After sending out the item, we will send you a notification letter, with the shipment information of the tracking number. 2. Shipment Type: The order of multi items may be sent via MULTI PACKAGES.If your order is including MULTI ITEMS, we may send the item to you via MULTI PACKAGES. If something is missing in the first package you received, please don't open a case or return, please ask us first, we will check if your order is sent via multi packages. 3. Delivery Time: DIFFERENT LOCATION, DIFFERENT SHIPPING TIME.In normal condition, the shipping time is about 2-5 working days. Some of that may be 5-10 working days.If you want to check the delivery time of your order, please kindly ask us first. Last but not Least, PLEASE DON'T OPEN THE CASE AND RETURN REQUEST/LEAVE NEGATIVE FEEDBACK FOR US BEFORE Before sending us a letter!!!Any issues, please kindly contact the customer service of our store FIRST.Terms of sales 1. We provide 30 days money back on non-defective, undamaged, unused and resalable products. Product is not eligible for refund after the 30-day refund period has expired. 2. Our warranty does not extended to any products that are physically damaged or that are not under normal operating conditions as a result of misuse or improper installation on the buyer/user's part. 3. For all returned products, Please contact us for the returning address and Pls do not open return case. 4. In all cases, buyers pay shipping fees at their own cost to return products for exchange or refund. In return, we will be responsible for the postage of replacements. Refund will be made upon receipt of the returned item.Contact us1. Please contact us via eBay massage if you have any questions. We will reply you within 24 hours. 2. Feedback is important to us, we will leave positive to our customers. 3. We understand the concerns and frustrations you might have, and will do our endeavor to resolve the issues. Please give us the opportunity to resolve any problem. 4. Please email us before leaving any 1 or 2 ratings, negative feedback or open any dispute. Delivery Worldwide

Price: 86.99 USD

Location: Walnut, California

End Time: 2023-11-30T10:21:13.000Z

Shipping Cost: 0 USD