Description: Store New Arrivals Add to Favorite View Feedback ContactAC Charge Hose with Gauge for R134A, Car HVAC Refrigerant Recharge Kit, Auto Air Conditioning U Charging Hose Low Pressure Measuring Meter with 1/4 Inch Fittings, Can Tap, Quick CouplerDescription Item model number JT014S2 Manufacturer Part Number JT014S2 Item Weight 10.6 ounces Voltage 12 Volts Model JT014S2 Package Dimensions 5.67 x 4.29 x 3.58 inches AC U Charge Hose: Refrigerant charging hose uses rubber nylon resin material hoses, featured with anti-corrosion, low fluid resistance, high bearing pressure, ensure durability and good air sealing. Max working pressure is 500PSI and burst pressure is upto 2500PSI. The total length is 23 inch, one side with R134a can tap, the other side with a brass 1/4 inch female fittings, which is used for R134A quick coupler directly.Refrigerant Charging Gauge: AC low pressure gauge with scale range -30inHg~250PSI, is equipped with metal 2-3/4 inch big dial, color coded scale to indicate pressure index for R134A, Celsius unit, for monitoring the automotive air conditioning low pressure side pressure easily. Built in calibration screw and no-flutter pointer insure a accurate refrigerant recharge.Brass Quick Coupler: Premium brass and aluminum, quick interface design with accurate snap lock and anti-slip knurled grip ring, easy to connect and disconnect, compatible with all models with standard R134A low pressure side suction service port. Aim at R134A suction service port, push to connect and lock. Pull up the knurled grip ring to loose and lift to disconnect.Can Tap: Brass can tap with 1/2 inch female thread interface, can screw to fix on 1/2 inch male thread of refrigerant bottle opening. T type knobs, easy to operate by fingertips. Internal pin with sharp tip help to pierce refrigerant bottle easily and quickly. Do not use the can tap as R134A cap, refrigerant is corrosive, if use this can tap as R134A cap for a long time, the inner rubber sealing ring will be corroded, then you will find it leaksMeasure Pressure and Recharge R134A: Start the car, open AC to MAX. Clockwise twist T handle to close can tap, connect the quick coupler and car AC suction service port to measure the pressure. The reading is right only when AC compressor is working. If need to charge the refrigerant, please compare to the manufacturer's recommended readings, choose the appropriate amount refrigerant can, to ensure there is no leftover in the can.Simple R134A Charging Tool: This air conditioning U hose gauge is very simple, only 23 inch long and equipped with a non-detachable gauge can tap. Also it is very easy to operate dynamic pressure measurement and refrigerant charging from auto low pressure suction service port. Product Description ACCURATE LOW PRESSURE GAUGE Dual pressure unit, with scale range -30inHg~250PSI -76cmHg~17.5kg/cm². Screw-on gauge screen, built-in calibration screw, no-flutter pointer, metal 2-3/4" big dial, color coded scale to indicate pressure index for R134A, Celsius unit R134A QUICK COUPLER Brass R134A low pressure side straight quick coupler, features with quick interface, accurate snap-on push to lock, anti-slip knurled grip ring, internal ball bearings, 1/4" male flare connector with dust cap R134A REFRIGERANT CAN TAP VALVE Brass can tap with 1/2" female thread interface, can screw to fix on 1/2" male thread of refrigerant bottle opening. Self-piercing type R134A can tap, with T type knob and internal pin with sharp tip, easy to operate PREMIUM REFRIGERANT CHARGE HOSE Rubber nylon resin material hoses, anti-corrosion, low fluid resistance, high bearing pressure, ensure durability and good air sealing. Max working pressure is 500PSI and burst pressure is upto 2500PSI HOW TO USE Measure Pressure 1. Start the car, open AC to MAX.2. Clockwise twist T handle to close can tap.3. Connect the quick coupler to the car AC suction service port to measure the pressure. Charge Refrigerant 1. Start the car, open AC to MAX.2. Anticlockwise twist T handle to retract the internal pin, screw the can tap on the R134a can.3. Connect the quick coupler to the hose connector and the car AC suction service port.4. Clockwise twist T handle to pierce R134a can, and then anticlockwise twist T handle to retract the internal pin, to connect the R134a can and the AC, for charging refrigerant.5. After charging, clockwise twist T handle to close can tap, turn off the vehicle and the AC system.6. Carefully disconnect the coupler from the AC system, the hoses may contain residual refrigerant. SPECIFICATION 1. Total length: 23" (left short one for can tap is 8", right is 15" for R134A quick coupler to connect). 2. Material: Rubber nylon resin hose and brass fittings. 3. Scale range: -30inHg~250PSI, -76cmHg~17.5kg/cm². FITMENT TYPE Air conditioning: fits for all models with R134A suction service port. Refrigerant can: Can with 1/2" male thread bottle opening, self-piercing type. NOTE 1. This AC charging hose is 23" in total. If your AC suction service port is hard to reach, you can buy our another one, B08BC8M4MK. 2. This AC charging hose kit is equipped with straight R134A quick coupler, some vehicles need 90° elbow coupler, please confirm your AC suction service port type before biding. 3. Please confirm your AC system type and refrigerant bottle opening size before biding. 4. Please wear gloves and goggles when use. 5. The AC refrigerant recharge tool should be used by professional or under the guidance of a professional. 6. Always refer to equipment manufacturer's operation instruction. 7. Please ensure the AC compressor is working when measure pressure. Wrong readings will be caused by stop working compressor. ABOUT US We offer the best prices around on high quality products. Our E-store includes media such as books, movies, music and games while offering electronics, toys, sporting apparel, clothing, tools, general home, garden items and more.SHIPPING We are always working hard to ensure your package arrives as soon as possible. Please understand that some factors like weather, high postal traffic, and the performance of shipping companies are outside of our control.We offer free shipping to the lower 48 states and ship within 2 business days of payment, usually sooner. We do not accept P.O. Boxes. Please provide a physical address.For shipping outside of the continental USA, we only use eBays Global Shipping Program.The item is shipped to KY and then sent to the rest of the world. International customers are responsible for all duties and taxes. Continue to check out in order to calculate costs for shipping the item to your country. Messages regarding eBays Global Shipping Program MUST be directed at eBay EXCLUSIVELY.RETURNS We offer a 30-Day Return Policy on items which you are not completely satisfied with. You have the option for a full-refund or an exchange of the item. No returns are available on items shipped outside of the USA.PAYMENT We accept PayPal.CONTACT US This page content is yet to comePlease ad us to your favorite seller and visit again laterThank YouCUSTOMER SATISFACTION We try our very best to make sure every customer is completely satisfied. If theres a problem, message us! Were happy to help.WE ACCEPTCopyright © 2021 AutoDS. | All Rights Reserved
Price: 26.82 USD
Location: San Bernardino, California
End Time: 2024-12-08T22:03:22.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Return shipping will be paid by: Seller
All returns accepted: Returns Accepted
Item must be returned within: 60 Days
Refund will be given as: Money Back
Return policy details:
Brand: Does not apply
Item model number: JT014S2
Manufacturer Part Number: JT014S2
Item Weight: 10.6 ounces
Voltage: 12 Volts
Model: JT014S2
Package Dimensions: 5.67 x 4.29 x 3.58 inches
Type: Does not apply