Description: Store New Arrivals Add to Favorite View Feedback Contact AC Charge Hose with Gauge for R134A, Car HVAC Refrigerant Recharge Kit, Home Air Conditioning U Charging Hose Low Pressure Meter 1/4 Inch Fittings Can Tap Quick Coupler Adapter, 42 Inch Long Description Item model number JT014S4 Thread Size 5/16 inch - 18 UNF Size 42" Long Color Blue Brand JIFETOR Material Brass, Plastic, Rubber, Steel Connector Type Cap, Adapter, Elbow Manufacturer Part Number JT014S4 Item Weight 0.99 Pounds Thread Type BIT Model JT014S4 Number of Pieces 1 Exterior Finish Brass Package Dimensions 5.71 x 4.25 x 3.27 inches Manufacturer JIFETOR AC U Charge Hose: Refrigerant charging hose uses rubber nylon resin material hoses, featured with anti-corrosion, low fluid resistance, high bearing pressure, ensure durability and good air sealing. Max working pressure is 500PSI and burst pressure is upto 2500PSI. The total length is 42 inch, with one side 1/4 inch female fittings connected with R134a can tap, and the other side 1/4 inch female fittings for R134A quick coupler or connect AC service port directlyRefrigerant Charging Gauge: AC low pressure gauge with scale range -30inHg~250PSI, is equipped with metal 2-3/4 inch big dial, color coded scale to indicate pressure index for R134A, Celsius unit, for monitoring the air conditioning low pressure side pressure easily. Built in calibration screw and no-flutter pointer insure a accurate refrigerant recharge. (NOTE: Use valve core tool to unscrew the valve core thimble a little bit if the hose angled connector would not depress the Schrader valve)Brass Quick Coupler: Premium brass and aluminum, quick interface design with accurate snap lock and anti-slip knurled grip ring, easy to connect and disconnect, compatible with all models with standard R134A low pressure side suction service port. Aim at R134A suction service port, push to connect and lock. Pull up the knurled grip ring to loose and lift to disconnect. There is also a 1/4 inch male to 1/2 inch female adapter included.Can Tap: Brass self-piercing can tap with 1/2 inch female thread interface, can screw to fix on 1/2 inch male thread of refrigerant bottle opening. T type knobs, easy to operate by fingertips. Internal pin with sharp tip help to pierce refrigerant bottle easily and quickly. Equipped with 1/4 inch male flare on the side, to hook directly to 1/4 inch female fittings of AC refrigerant charging hoseMeasure Pressure and Recharge R134A: Start the car, open AC to MAX. Clockwise twist T handle to close can tap, connect the quick coupler and car AC suction service port to measure the pressure. The reading is right only when AC compressor is working. If need to charge the refrigerant, please compare to the manufacturer's recommended readings, choose the appropriate amount refrigerant can, to ensure there is no leftover in the can.Simple R134A Charging Tool: This air conditioning refrigerant charge hose gauge is very simple, only 42 inch long and equipped with gauge can tap quick coupler. Also it is very easy to operate dynamic pressure measurement and refrigerant charging from auto low pressure suction service port. Product Description ACCURATE LOW PRESSURE GAUGE Dual pressure unit, with scale range -30inHg~250PSI -76cmHg~17.5kg/cm². Screw-on gauge screen, built-in calibration screw, no-flutter pointer, metal 2-3/4" big dial, color coded scale to indicate pressure index for R134A, Celsius unit. R134A QUICK COUPLER and BRASS ADAPTER Brass R134A low pressure side straight quick coupler, features with quick interface, accurate snap-on push to lock, anti-slip knurled grip ring, internal ball bearings, 1/4" male flare connector with dust cap. The 1/4" male to 1/2" female brass adapter is suitable for some 1/2" AC service port, or you can use it in some other places that can be used. R134A REFRIGERANT CAN TAP VALVE Brass can tap with 1/2" female thread interface, can screw to fix on 1/2" male thread of refrigerant bottle opening. Self-piercing type R134A can tap, with T type knob and internal pin with sharp tip, easy to operate. PREMIUM REFRIGERANT CHARGE HOSE Rubber nylon resin material hoses, anti-corrosion, low fluid resistance, high bearing pressure, ensure durability and good air sealing. Max working pressure is 500PSI and burst pressure is upto 2500PSI. HOW TO USE Measure Pressure 1. Start the car, open AC to MAX.2. Clockwise twist T handle to close can tap.3. Connect the quick coupler to the car AC suction service port to measure the pressure. Charge Refrigerant 1. Start the car, open AC to MAX2. Connect can tap to hose connector, anticlockwise twist T handle to retract the internal pin, screw the can tap on R134a self-piercing can3. Connect the quick coupler to the hose connector and the car AC suction service port4. Clockwise twist T handle to pierce R134a can, and then anticlockwise twist T handle to retract the internal pin, start to charge refrigerant5. After charging, clockwise twist T handle to close can tap, turn off the vehicle and the AC system6. Carefully disconnect the coupler from the AC system, the hoses may contain residual refrigerant SPECIFICATION 1. Total length: 42" (left short one for can tap is 15", right is 27" ) 2. Material: Rubber nylon resin hose and brass fittings 3. Scale range: -30inHg~250PSI, -76cmHg~17.5kg/cm² FITMENT TYPE Air conditioning: fits for all models with R134A suction service port & low pressure side service port 1/4" male connector Refrigerant can: Can with 1/2" male thread bottle opening, self-piercing type NOTE 1. This AC charging hose is 42" in total. You can buy our another one when you need a shorter hose set, B085TD4DKS & B085T4CXC2. 2. This AC charging hose kit is equipped with straight R134A quick coupler, some vehicles need 90° elbow coupler, please confirm your AC suction service port type before biding. 3. Please confirm your AC system type and refrigerant bottle opening size before biding. 4. Please wear gloves and goggles when use. 5. The AC refrigerant recharge tool should be used by professional or under the guidance of a professional. 6. Always refer to equipment manufacturer's operation instruction. 7. Please ensure the AC compressor is working when measure pressure. Wrong readings will be caused by stop working compressor. Add to Cart Add to Cart Add to Cart Add to Cart Add to Cart Add to Cart Customer Reviews 4.1 out of 5 stars 435 4.1 out of 5 stars 219 4.2 out of 5 stars 203 4.1 out of 5 stars 74 4.1 out of 5 stars 517 4.4 out of 5 stars 177 Price $13.99$13.99 $15.99$15.99 $23.99$23.99 $17.99$17.99 $25.99$25.99 $12.99$12.99 Application R134A R134A R134A R134A R134A, R404A R134A Length Total 19" Total 23" Total 42" Total 42" 3PCS 3FT hoses Gauge 0-100psi, 0-7kg/cm² -30inHg~250psi, -76cmHg~17.5kg/cm² -30inHg~250psi, -76cmHg~17.5kg/cm² -30inHg~250psi, -76cmHg~17.5kg/cm² 3 way manifold gauge with dual dials, -30inHg~250psi & 0~500psi R134A Quick Coupler One for low pressure side. Elbow, non-detachable One for low pressure side. Straight, detachable One for low pressure side. Straight, detachable One for low pressure side. Straight, detachable Two for low and high pressure sides. Straight, detachable Two for low and high pressure sides. Adjustable quick coupler R134A Can Tap Non-detachable. Self-piercing type Non-detachable. Self-piercing type Detachable. Self-piercing type Detachable. Self-piercing type Detachable. Self-piercing type 1/4" Female Fittings on Hose Only one on the longer hose side Two on both sides of hoses Two on both sides of hoses Two on both sides of each hose, total 6PCS Tank Adapter 1/4" male to 1/2" female 1/4" male to 1/2" female Other Hose valve core repair kit ABOUT US We offer the best prices around on high quality products. Our E-store includes media such as books, movies, music and games while offering electronics, toys, sporting apparel, clothing, tools, general home, garden items and more. SHIPPING We are always working hard to ensure your package arrives as soon as possible. Please understand that some factors like weather, high postal traffic, and the performance of shipping companies are outside of our control. We offer free shipping to the lower 48 states and ship within 2 business days of payment, usually sooner. We do not accept P.O. Boxes. Please provide a physical address. RETURNS We offer a 30-Day Return Policy on items which you are not completely satisfied with. You have the option for a full-refund or an exchange of the item. No returns are available on items shipped outside of the USA. PAYMENT We accept PayPal. CONTACT US This page content is yet to come Please ad us to your favorite seller and visit again later Thank You CUSTOMER SATISFACTION We try our very best to make sure every customer is completely satisfied. If theres a problem, message us! Were happy to help.
Price: 25.88 USD
Location: Denver, Colorado
End Time: 2024-09-28T02:15:09.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Seller
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Brand: JIFETOR
Item model number: JT014S4
Thread Size: 5/16 inch - 18 UNF
Size: 42" Long
Color: Blue
Material: Brass, Plastic, Rubber, Steel
Connector Type: Cap, Adapter, Elbow
Manufacturer Part Number: JT014S4
Item Weight: 0.99 Pounds
Thread Type: BIT
Model: JT014S4
Number of Pieces: 1
Exterior Finish: Brass
Package Dimensions: 5.71 x 4.25 x 3.27 inches
Manufacturer: JIFETOR
Type: Does not apply