ADE RD3-006A1 Green Dot Reflex Sight For 2022 NEW Canik TP9 SFX RIVAL Pistol

Description: Item Description*******Instant Credit Card Checkout**************FAST & FREE SHIPPING************** Fits directly on Canik TP9 Elite COMBAT, TP9 SFX, TP9 COMBAT using Canik provided "doctor mounting plate" which comes with the pistol purchase. This ADE sight does NOT fit Canik TP9 SFT, TP9 Elite SC, METE SFX, METE SFT. It fits certain canik tp9, such as TP9 SFX and TP9 Elite Combat. Basically your canik MUST comes with several plates, this sight fits on one of the plate marked as #01 plate for doctor/vortex type screw hole. Again, if your canik tp9 such as TP9 SF, TP9 ELITE, these do NOT comes with plate when you purchase the pistol, that is likely your canik is NOT a optics ready pistol, it can not attach an red dot unless you pay a machine shop to custom mil a cut on the slide.If you are NOT sure if this red dot will fit your pistol, please Click HERE to send us a message of EXACT model of your pistol, we will let you know if you need a optic plate(it could an aftermarket plate to replace the rear sight, or pistol factory provided plate for Optic Ready pistol) and we will provide precise information of the plate you need. You will receive the reply within 8 hours Monday-Sunday. When you first receive the red dot. It has a picatinny mounting plate pre-assembled. Please use the allen wrench provided to take out the 2 hex screws on the top behind the glass frame. It will disconnect the red dot from the picatinny mounting plate. You will then be able to attach the red dot to a variety of handgun mounting plates that are sold separately. This model does NOT fit the new Canik TP9 Elite SC and Springfield Hellcat, ADE is releasing a new model called SPIKE(RD3-018) will fit rms/rmsc footprintWe have pistol mounting plates for Berreta, S&W MP, Springfield XD, Colt 1911, Glock and HK USP, please copy the link below and open to see the mounting plates https://stores.ebay.com/Opticsfactory/_i.html?_nkw=pistol+mount&submit=Search&_sid=826840444 Manufacturer Part# rd3-006b-2The green dot is compatible with Ade handgun mounts for Glock Barreta HK UPS SW MP SIG P226 Springfield.Can also be used with a long range rifle scope for that perfect Backup SystemThe on/off switch is located at the front of the sight, it is so much easier to press than the Red dots has the switches on the side. 3 MOA. 5 Illumination settingsLenses are precision ground and Polished to exacting geometries to virtually eliminate Parallax and to provide a very clear, crisp sight pictureFully windage and elevation adjustable and lockable; Unlimited Eye Relief. Powered by a lithium CR2032 battery(Included)Fully shockproof and fogproof. Lenses are precision ground and polished to exacting geometries to virtually eliminate parallax and to provide a very clear, crisp sight pictureFully windage and elevation adjustable and lockable3 MOA5 Illumination Settings.Powered by a lithium CR2032 battery(Included)Magnification: 1XSight Window: 25mm x 16mm; .98" x .62"Elevation Adustment Range: 3° or 190" @ 100 yds (524 cm @ 100 m)Windage Adjustment Range: 3° or 190" @ 100 yds (524 cm @ 100 m)Set Value for One Scale Division: 1 MOA or 1" @ 100 yds with 60 scale divisions per turnSubtension of the Aiming Dot: 4 MOA (10.5 cm @ 100 m)Parallax-Free Sighting Distance: approx. 50 ydsRecoil Resistance: At least 1000 GsOperating Temperature Range: -10°F to +130°F (-25°C to +55°C)Storage Temperature Range: -40°F to +160°F (-40°C to +70°C)Power Supply: 3V with one CR 2032 Lithium batteryDimensions: L 2.0" x W 1.0" x H 1.1" (52 mm x 26 mm x 28 mm)Weight (in operating condition without mounting materials): 0.9 oz (25 g). Included:Allen wrench to tighten fastenersScrewdriverAdjusting discProtective cap3V Lithium battery (CR 2032)Operating instructionsWeaver/Picatinny-style mountExtra rubber sealing ring for battery compartmentThis ADE RD3-006, alone with RD3-009,RD3-012,RD3-013 do NOT fit Springfield HELLCAT OSP, because springfield Hellcat OSP red dot footprint is based on Shield RMS. ADE sights has the footprint of Doctor/Vortex Venom type footprint. This RD3-006, and RD3-009, RD3-012 and RD3-013 fits directly to "Optics Ready" pistols such as Glock MOS, Springfield OSP(non-hellcat), Canik TP9 SFX(non elite sc), Walter PPQ Q5 Match, FNX 45 Tactical, IWI Masada handguns that come with mounting plates that marked for DOCTOR/VORTEX VENOM type red dot. All mentioned above pistols must to be OPTICS READY model that comes with MOUNTING PLATE marked for DOCTOR/VORTEX. If not, user has to purchase after market mounting plate(not included with this red dot sight purchase) to replace the rear sight. When you first receive the red dot. It has a picatinny mounting plate pre-assembled. Please use allen wrench provided to take out the 2 hex screws on the top behind the glass frame. It will disconnect the red dot from the picatinny mounting plate. You will then be able to attach the red dot to a variety of handgun mounting plates that are sold separately. There are many popular handguns on the market, due to the size difference of the handguns, each mounting plate is slightly different in dimensions. There are also many manufacturers making a variety of handgun plates that replace the rear sight, including ADE, Lakeline LLC, EGW, and Outerimpact. The screw comes with our red dot come with a pair of M3x6mm screws to connect to the pre-assembled picatinny mounting base. Some mounting plates made by other companies for specific handgun might need a longer screw such as M3x8mm or shorter screw such as M3x4mm depends on the thickness of the mounting plate/adapter. If you can’t get the screw to work properly, we recommend going to a local hardware store such as ACE Hardware to get the right size. Payment We accept any payment method ebay allows such as paypal at the checkout. Shipping We ship all items within one business day of receiving cleared payments. For payments received by 2pm PsT(Pacific Daylight Time), the package usually ships in the same day. Free shipping within 1 business day with tracking number. No international shipping!Other You can return any purchase that is Undamaged in like new condition within 30 days for full money back or exchange. If you have any question, please click contact seller. We always reply emails within 8 hours.Purchase Eligibility We have to accept the fact that things are different than when we were younger, so please make sure you can legally order and possess this item BEFORE you submit your bid. All NFA rules apply, where applicable. YOU are responsible to following ALL laws and regulations regarding the ownership, possession and end use of this item. Track Page Views With Auctiva's FREE Counter

Price: 71.52 USD

Location: Oregon City, Oregon

End Time: 2023-11-14T03:38:35.000Z

Shipping Cost: 0 USD