Aero Downforce Kit Ground Effects Undertray Diffuser Team Associated DR10 NPRC

Description: AJCMods 3D Printed Full Aero Kit for the Team Associated DR10. Get ready to take your DR10 to the next level with this brand new Ground Effects kit from the AJC Labs. Shown to reduce drag at high speed and greatly improve high speed stability and downforce. A flat bottom creates over 1/3 of the car's downforce and when combined with the rear diffuser and front splitter the results are night and day. A front splitter serves to force air up and over the body to create downforce and a diffuser creates downforce by creating a pressure differential, and serves to eject air out from underneath the car. This pulling action decreases the velocity of air below the car, so that the more slowly moving air above the car will push the car into the ground with low pressure beneath and high pressure above. This all means you will be able to apply more power with more stability at high speeds than anyone else at the strip! NEW: X-Link bar now included with every order! This piece mounts to the rear diffuser and allows the diffuser to mount to any aftermarket wheelie bar, or no wheelie bar at all! The stock diffuser is designed with two holes that line up with threads on the stock wheelie bar, where two M3x8 screws are sent in.The X-Bar spans the gap that is present when using an aftermarket wheelie bar and can be spun a full 360 degrees to fit flush with a variety of bars. Once flush simply use two zip ties to secure the X-Bar to the wheelie barWhat's Included & Specifications:1x Left Side Underbody Pan (56.7g)1x Right Side Underbody Pan (56.7g)1x Rear Diffuser (83.9g)1x Front Splitter (62.6g)1x Chassis Stiffener (9.7g)1x Rear X-Link Bar*Chassis Stiffener is optional depending on track conditions All Pieces are sold separately on our website and here on eBay Hardware Needed:4x M3x20mm Button Head2x M3x12mm Button Head2x M3x8mm Flat Head2x M3x10mm Flat Head2x M3x12mm Flat Head2x M3x16mm Flat Head(full pack can be included for $4.95 extra)Some of the hardware is already included with the DR10, the rest however are not Notes (Updated 12/18/20): -Brand new design as of 12/18, reinforced rear diffuser for greater strength! -Designed to fit perfectly on stock DR10 chassis & body, may require modifications if using aftermarket body shell-The car & electronics shown in the pictures are for demonstration purposes only and are NOT included - this is for the Aero Kit only-New rear diffuser design, individual pieces now posted-Now includes rear X-Link Bar-Fits on aftermarket TARP chassis for DR10!

Price: 55 USD

Location: Acworth, Georgia

End Time: 2024-08-17T17:24:40.000Z

Shipping Cost: 0 USD