Description: THIS ITEM IS 815 Euros new on AIM TTi website. The item in the listing is the exact kit as pictured, NEVER used, but without the original box. We were setting up a lab, but moved to another country, and are selling off the unused new equipment. This is a very nifty and useful probe unit -- it is non-contact / wireless and can follow traces buried inside a PCB, and a bunch of other uses too. Just connect it to your oscilloscope. From the manufacturer: The I-prober 520 achieves something radically new.It can observe and measure currents in PCB tracks and other conductors where conventional current probes can’t be used. This includes captive wires into components, the legs of integrated circuits, and PCB ground planes. Conventionally, current can only be measured by either breaking the circuit to insert a shunt resistor, or by surrounding the conductor by a loop of magnetic material as in a standard current probe. The I-prober 520 enables currents, from dc up to 5MHz, to be observed and measured simply by placing its insulated tip onto the conductor.he I-prober 520 uses the well established principle of a fluxgate magnetometer to measure field. Conventional fluxgate magnetometers are relatively large with bandwidths limited to a few kHz. They are typically used for precision measurement of fields within geophysics and bio-electromagnetics. By contrast, the sensor within the I-prober 520 uses a patented miniature fluxgate magnetometer of sub-millimetre size incorporating a highly advanced core material. This enables it to use an excitation frequency of several tens of MHz resulting in a sensor with a bandwidth of dc to 5MHz combined with low noise and wide dynamic range. Current measurement from insulated probing of conductor Suitable for observation and measurement of current in PCB tracks, component leads and ground planes Wide dynamic range of 10mA to 20A peak to peak Wide bandwidth of DC to 5MHz Low noise figure equivalent to <6mA rms at full bandwidth Safety rated to 300V Cat II (600V Cat I) Suitable for connection to any oscilloscope High accuracy general purpose H-field probe Converts to standard ‘closed magnetic circuit’ current probe No requirement to break or surround the conductor Observe and measure currents in PCB tracks directly Minimal disturbance to circuit conditions through very low insertion impedance and stray capacitance Usable in confined and difficult to access spaces Measures current into surface mount components, IC legs and short component leads Can observe currents flowing within ground planes Usable on high voltage conductors and in high temperature areas
Price: 675 USD
Location: Louisburg, North Carolina
End Time: 2024-10-26T12:24:39.000Z
Shipping Cost: N/A USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
Country/Region of Manufacture: United Kingdom