AudioControl 6-Channel Amplifier Class D 1200W with Channel Summing LC-6.1200

Description: Welcome to the UpBeat Store, your ultimate destination for top-tier automotive aftermarket installations, covering both OEM and aftermarket radios with precision and finesse. With over 12 years of specialized experience, trust us to elevate your driving experience seamlessly. Don't forget to follow us and visit frequently for the latest deals. Our dedicated customer service team is here to assist you promptly and professionally as we turn your automotive aspirations into reality! This fixed-price listing includes the AudioControl LC-6.1200 High Power 6-Channel Amplifier with AccuBASS.The LC-6.1200 brings six channels of sonic purity and unprecedented levels of power to a complete range of multi-channel and subwoofer amplifiers from AudioControl. Featuring eight active speaker level inputs, six line level inputs, the LC-6.1200 is packed with intuitive setup controls for high-pass, band-pass, and low-pass filters, automatic and selectable signal summing, and AccuBASS. Integrate seamlessly with your OEM or aftermarket sound system with this single-amp solution, which will transform your audio with impressive power levels delivered to your speakers and subs. Add the optional ACR-1 remote for level control.In The BoxLC-6.1200 AmplifierSpeaker and Power ConnectorsFusesManualWarrantyLC-6.1200 Features Configurable as 6/5/4/3/2 channel amplifier6 x 200 watts @ 2 ohms6 x 125 watts @ 4 ohms400 watts @ 4 ohms bridgedAccuBASS® ProcessingMILCTM Maximum Input Level Control (Patent Pending)GTOTM Signal Sense3-way Independent Linkwitz-Riley Alignment crossoversSummable active speaker-level inputs (8 channels) for OEM integration6 preamp inputs2 assignable preamp outputsPFM Subsonic FilterOptional ACR-1 assignable remote controlSolid One-Piece Aluminum ChassisLC-6.1200 SpecificationsInputsPreamp Inputs: 6 balancedPreamp Input Voltage Range: 250 mV – 8 VrmsSpeaker Level Inputs: 8Speaker Level Input Voltage Range: 3 V – 40 VrmsOutputsRated Continuous (RMS) Power at 14.4V:4 Ω – 125 W x 6 RMS2 Ω – 200 W x 6 RMSBridged 4 Ω – 400 W RMSPreamp Outputs: 2Maximum Preamp Output: 8.5 V RMSPerformanceFrequency Response: 10 Hz – 30 kHzSignal to Noise: 102 dBa, Ref 200 W @ 2 OhmTHD+N: < 0.1%Minimum Power / Ground Wire Gauge: 3 AWG wireFuse Rating: 3 x 40 ACrossover: 3-way Linkwitz-Riley, Adjustable From 30 Hz – 5000 HzWeights & DimensionsDimensions: 12″W x 8.0″D x 2.1″HWeight: 7.2lbs. (3.3kg)AccuBASS The patented AccuBASS processing circuit compensates for factory bass roll off to improve bass performance, especially with most factory installed sound systems. The circuit has two rotary controls: the Threshold lets you dial in the level at which the AccuBASS will begin to work, while the Level control raise or lower the level of AccuBASS compensation.ACR-1 Remote The optional AudioControl ACR-1 wired remote, when enabled, lets you adjust the level of the main outputs, and the line outputs, from the driver's seat. Switches, located on the top of the amp under the removable cover, let you enable or disable AccuBASS and the ACR-1 for each pair of channels. If disabled, the ACR-1 only controls the level of the line outputs. The ACR-1 comes with a 20' cable.Maximum Input Level Control (MILC) The amplifier analyzes the input signal to detect any clipping. If the signal reaches the level of clipping, the MILC Source Clip LED glows red, prompting you to turn down the gain level. When the gain level is maximized, a green Maximized LED will glow to indicate the gain, for that set of channels, is set to the optimum level.GTO (Great Turn On) Signal Sense If you are connecting the amplifier to a factory stereo, or an aftermarket unit without preamp outputs and a remote turn-on lead, the GTO Signal Sense circuitry can turn on the amplifier when an audio signal is detected on either the line-level or speaker-level inputs. After a period with no signal input, the amp will turn itself off. Controls The LC-6.1200's controls are located under a removable protective panel. The included 2.5mm Allen wrench is needed for removing the panel during setup. A flat-head screwdriver (not included) is needed to adjust the rotary controls. The amp's controls are as follows:GTO Signal Sense: On/OffChannels 1/2: Front High Input: This rotary control adjusts the level of the Front High speaker-level input. AccuBASS & ACR-1: 2-way switch to enable or disable the AccuBASS circuit and the ACR-1 remote level control (if connected). HP Crossover Frequency: This rotary control sets the cutoff frequency of the High Pass Crossover for Channels 1/2. The control is variable from 30Hz to 300Hz. Crossover Range: This switches the crossover range between 30 - 300Hz and 500 - 5kHzMode: If bridging channels 1/2, you can set the output to mono. If not bridging, it can be run in stereo. Gain: This rotary gain control adjusts the overall output of channels 1/2.AccuBASS: The AccuBASS circuit enhances the bass performance of the amplifier. Threshold: The Threshold control selects the level at which the AccuBASS will begin to work. Level: This dial adjusts the level of the AccuBASS. 1/2 - 3/4 Bus Sum: This switch can sum inputs 1/2 and 3/4 together so one pair of inputs can feed outputs 1 - 4.Channels 3/4: AccuBASS & ACR-1: 2-way switch to enable or disable the AccuBASS circuit and the ACR-1 remote level control (if connected). Crossover Type: This switch determines whether channels 3/4 will be High-passed or Band-passed. Two crossover Frequency dials are used in conjunction with this switch.Crossover Frequency: These rotary controls set the cutoff frequency(s) of the crossover for Channels 3/4. The High-pass dial has a range of 30Hz - 300Hz and the Low-pass dial's range is 500Hz - 5kHz.Mode: If bridging channels 3/4, you can set the output to mono. If not bridging, it can be run in stereo. Gain: This rotary gain control adjusts the overall output of channels 3/4.3/4 - 5/6 Bus Sum: This switch can sum inputs 3/4 and 5/6 together so one pair of inputs can feed outputs 3 - 6.Channels 5/6: AccuBASS & ACR-1: 2-way switch to enable or disable the AccuBASS circuit and the ACR-1 remote level control (if connected). Crossover Type: This 2-way switch allows the Crossover for channels 5/6 to be either Low-pass or High-pass.Crossover Frequency: This rotary dial sets the Crossover frequency, whether HP or LP. The range is 30Hz - 300Hz.Mode: If bridging channels 5/6, you can set the output to mono. If not bridging, it can be run in stereo. Gain: This rotary gain control adjusts the overall output of channels 5/6.LED Indicators: The LC-6.1200 has six LEDs on the front panel to let you know the status of the amp.Power: If the amp is powering on correctly, this should be lit green.Protection: The amp has built-in diagnostic codes to tell you exactly what is going wrong if the amp detects a problem. Both the Protection and Power LEDs can flash certain codes indicating where the problem is. A chart of these is provided in the Quick-start guide.MILC Source Clip LED: The MILC (Maximum Input Level Control) level-setting circuit prevents clipping and distortion. It calculates when the waveform of an incoming signal on input 1 or 2 is clipping and lights this LED. The level of the incoming signal should be set just prior to MILC LED coming on.Maximized 1/2, 3/4, and 5/6 LEDs: These LEDs indicate when the LC-6.1200 amp gain for channels 1/2, 3/4, and 5/6 has been maximized for optimum performance.Connections The LC-6.1200's connections are aligned along the front of the amplifier for ease of installation. The amp's connections include:Fuses: Three 40A ATO blade-type fuses are installed in the amplifier. Power: Set-screw terminals are provided for connecting +12V Power, Ground, and Remote In. The set screws can be tightened/loosened with a Phillips-head screwdriver (not included). The Power and Ground terminals will accept 4 to 0 gauge wire, while the Remote In terminal accepts up to 6 gauge. A 120A fuse should be placed in-line on the power wire, no more than 18" from the battery. Line Level Inputs: Three pairs of RCA jacks are provided for connecting the amp to the source unit via RCA cables. Line Level Output: One pair of RCA jacks for feeding the signal to another amplifier. Speaker Level Input: Four sets of removable Phoenix (or Euroblock) connectors are provided for connecting the source unit via speaker-level input. The speaker wires are inserted into the connector and tightened with a screwdriver (5/64" Precision Phillips-head, not supplied). The connectors are labeled Front High (for tweeters), Front, Rear, and Sub.ACR-1 Remote Level Control: This RJ-14 telephone-type connection allows you to plug in the optional ACR-1 Remote. The ACR-1 controls the output level of the amplifier and line outputs. Speaker Output: Three removable Phoenix connectors are provided for connecting speaker wire. The amplifier will accept a load impedance of 2Ω or higher in stereo (4Ω or higher when bridged). The speaker wires are inserted into the connector and tightened with a screwdriver (9/64" Precision Phillips-head, not supplied).Power Output: The LC-6.1200 has the following output: o 6 x 124 Watts @ 4 Ohms o 6 x 200 Watts @ 2 Ohms o 400 Watts @ 4 Ohms bridgedAudioControl Warranty Policy AudioControl products are designed, engineered, and tested at our facility located in the Pacific Northwest, USA. Given our huge commitment to quality, AudioControl comfortably warranties all materials and workmanship on our products for a period of five years from the date of purchase, provided it is installed by an authorized AudioControl dealer. Should you choose to install it yourself, your warranty is one year from the date of purchase from an authorized AudioControl dealer. A Few Words About Warranties People are scared of warranties. Lots of fine print. Months of waiting around. Well, fear no more, this warranty is designed to make you rave about us to your friends. It’s a warranty that looks out for you and helps you resist the temptation to have your friend, “…who’s good with electronics”, try to repair your AudioControl product. So go ahead, read this warranty, then take a few days to enjoy your new AudioControl processor before registering the warranty card and comments. “Conditional” doesn’t mean anything ominous. The Federal Trade Commission tells all manufacturers to use the term to indicate that certain conditions have to be met before they’ll honor the warranty. If you meet all these conditions, we will warranty all materials and workmanship on your AudioControl product for one year from the date you bought it from an authorized AudioControl dealer (five years if it is installed by an authorized AudioControl dealer). We will fix or replace it, at our option, during that time. Here Are The Conditional Conditions 1. You have to go online and register your AudioControl products. Alternatively, you may fill out the Warranty Registration card that came with your product and mail it to us. 2. You must keep your sales receipt for proof of purchase showing when and from whom the unit was bought. We’re not the only ones who require this, so it’s a good habit to get into with any major purchase. 3. Your AudioControl products must have originally been purchased from an authorized AudioControl dealer. You do not have to be the original owner, but you do need a copy of the original sales slip. 4. You cannot let anybody who isn’t: (A) the AudioControl factory; (B) somebody authorized in writing by AudioControl to service your product. If anyone other than (A) or (B) messes with your AudioControl product, that voids your warranty. 5. The warranty is also void if the serial number is altered or removed, or if your AudioControl component has been used improperly. Now that sounds like a big loophole, but here is all we mean by it. Unwarranted abuse is: (A) physical damage (don’t use it to level your RV); (B) improper connections (120 volts AC into a 12-volt DC power jack can fry the poor thing); (C) sadistic things (your imagination is best kept private). This is the best product we know how to build, but if you mount it to the front bumper of your car or use it as a counterweight for your daughter’s trebuchet project, something will go wrong. 6. If an authorized United States AudioControl dealer installs your component, the warranty is five years. Assuming you conform to 1 through 6, and it really isn’t all that hard to do, we get the option of fixing your old unit or replacing it with a new one. To initiate a warranty claim, please contact AudioControl and we will issue an RA (Return Authorization) number and provide shipping instructions. Products received at AudioControl without an RA number will be refused. Legalese Section This is the only warranty given by AudioControl. This warranty gives you specific legal rights that vary from state to state. Pomises of how well your AudioControl component will perform are not implied by this warranty. Other than what we have covered in this warranty, we have no obligation, express or implied. Also, we will not be obligated for direct or indirect consequential damage to your system caused by hooking up your AudioControl component. Failure to properly register your AudioControl warranty may negate any service claims. Additional Notes We recommend having a professional certified technician handle the installation. For any questions or concerns about the product, please contact us through the "Contact Seller" feature for technical support or customer assistance.

Price: 639 USD

Location: San Juan, Puerto Rico

End Time: 2024-09-10T13:44:03.000Z

Shipping Cost: N/A USD