AUDISON APS8R 8" 500W SINGLE 4OHM SUBWOOFER FOR PORTED SPEAKER ENCLOSURE BOX NEW

Description: Brand New!APS-8R - Audison 8" 500W Single 4-Ohm Subwoofer For Ported Enclosure Box Features & Specifications: General Features: * APS 8 R Subwoofer Driver | 500 W Peak Power | 200 mm | 4 ohm With the aim of providing high acoustical output even when used with lower power, the APS 8 R was designed for use in an 8.5-litres reflex enclosure, with tuning between 30 and 40Hz. The APS 8 R has been specifically developed to be combined with either the AP8.9 bit or AP4.9 bit / AP4 D. Prima subwoofer components have been developed with a primary goal: to deliver high output in tight spaces. Output is a matter of excursion; the more air the cone moves, the more output. However reduced mounting depth traditionally has meant low excursion. Prima subwoofers employ a special cone-dustcap-basket geometry which guarantees large excursion of the mobile group, while keeping the mounting depth to a minimum. The surround and spider have been carefully designed to prevent the rocking-mode phenomenon. The cooling circuit has been designed with air vents on the basket underneath the spider, eliminating the need for vents on the bottom-plate. This allows the subwoofer to be mounted close to the back wall of the enclosure, making the most of the reduced mounting depth. Features Ultra-low profile (3.11 in. / 79 mm) for maximum installation flexibility.Designed to deliver maximum performance in a reflex enclosure starting from 8.5 lt.Special designed cone-dustcap-basket geometry which guarantees a long linear excursion capability (almost 9 mm, one-way) while keeping the mounting depth to minimum.Air vents on the basket underneath the spider, eliminating the need for the central pole vent allowing mounting close to rear wall of enclosure. Massive motor assembly optimized with FEM (Finite Element Modeling) for perfect control under high excursion conditions. Water-repellent pressed paper 8 in. cone featuring a profile developed with FEM simulation and optimized with the Klippel Scan Vibrometer. Specifically developed to be combined with either the Audison AP8.9 bit (2 CH bridged) or AP4.9 bit /AP4 D (2 CH bridged) amplifiers.Steel mesh grille and plastic gasket included. Technical Specs Size 200 mm Power Handling - Peak 500 W Power Handling - Continuous 250 W Impedance 4 Ohm Magnet Material HIGH DENSITY FLUX FERRITE Voice Coil Ø 40 mm Woofer Qes 0,43 Cone Material WATER REPELLENT PRESSED PAPER Xmax 8.8 mm Xmech Mounting Depth 16.5 mm 3.11 inch International Shipping: Free shipping DOES NOT APPLY to Puerto Rico, Hawaii, Guam, Alaska or any country outside of the United States.Please message us for shipping quotes. Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight (shipping) company or when you pick the item up – do not confuse them for additional shipping charges. Warranty: Each and every product for sale on ebay.com by woofersetc is covered under a (1) One Year Warranty, and can be returned for a period of (1) one year for warranty service. If you have purchased a product from us within the last one (1) year, and it is failing to perform as intended by its manufacturer, please email customer service. You will be issued a Return Authorization Number. Returns will not be accepted without a previously issued RA#. In order to maintain an inventory of 100%, Brand New, A-Stock, untouched products, all sales are final. We ask that you please be sure you are ordering the correct product. Protect Your Product With a Consumer Priority Service Warranty

Price: 219.99 USD

Location: Los Angeles, California

End Time: 2024-08-15T22:59:36.000Z

Shipping Cost: 0 USD