Custom Monocore Vented Baffle for Air Venturi Avenger & Umarex Origin Air Rifles

Description: Custom Monocore Vented Baffle for Air Venturi Avenger (.177, .22, .25 cal) and Umarex Origin (.22 cal) Air Rifles Picture of the part to be shipped to you (Color may vary from what is shown) Custom monocore vented baffle system designed for the Air Venturi Avenger and Umarex Origin air rifles. Simple drop-in installation (steps are shown below). Does NOT require removal of the barrel shroud. TO EBAY: This item DOES NOT VIOLATE the Firearms and Accessories Policy This item is for Air Venturi and Umarex Air Rifles only, not Firearms. Before and after results obtained for my friend's.25 caliber Avenger is shown below. Please note that your results will vary. Performance is highly dependent on the tune of your particular gun (hammer spring tension, transfer port sizing and other manufacturing variations), fill pressure, atmospheric conditions, as well as the ammo that you are using (you will generally notice larger differences using heavier pellets.) BEFORE AFTER Avg speed: 914 fps 26.54gr JSB Hades Meter placement: 3 feet offset from centerline 10 feet forward of muzzle (Many thanks to H.Halfhill for providing the test results.) IMPORTANT NOTE Air Venturi has recently begun sending out Avengers with a new end cap design that has a very basic stacked washer-style baffle attached. The custom monocore baffle occupies the same space as their basic baffle structure in the rifle shroud, so you will need to carefully unscrew their baffle structure from the endcap. You just want to be using the endcap with this monocore baffle. Many thanks to Harry for sending me this picture so that I can include it here. New end cap with baffle structure attached. Baffle structure unscrewed from the Endcap. MONOCORE BAFFLE INSTALLATION STEP 0 Please remove any attached magazines from the breech, and ensure that gun is not loaded or cocked. Engage your trigger safety. STEP 1 Remove the endcap from your barrel shroud. (Yes, what is pictured here is not the Avenger or Origin, but the procedure is exactly the same.) See above if you have a baffle structure attached to the endcap. You'll need to separate them as shown to get just the endcap. STEP 2 Carefully work the baffle into the shroud, making sure not to dislodge the silicon o-ring. The o-rings have been coated with silicone lubricant to make this easier. Note that the fluted end goes down into the barrel shroud. STEP 3 At around this point you may encounter a stop. This is where the bottom of the baffle has reached the tip of the barrel inside the shroud. STEP 4 You may need to twist and turn the baffle in order to work it over the barrel. STEP 5 Properly fitted, you should be able to push the baffle down until it clears the end cap threads (as shown.) STEP 6 To complete the installation, thread back on your barrel shroud endcap. Recent Customer Feedback Terms of Sale $5.75 shipping (for first item, $4 for any additional items) via USPS First Class Parcel Delivery to US Addresses. Visa/Mastercard/Discover/AMEX payments accepted thru PayPal.com payment service. All Sales are Final

Price: 32.99 USD

Location: San Diego, California

End Time: 2023-10-14T16:51:11.000Z

Shipping Cost: 5.75 USD