DENTEX Dental Cure Light Composite Resin Kit /Bonding Adhesive 37% Etching Gel

Description: Light Curing Resin A1/A2/A3/A3.5/B1 Description:All Class of direct restoration for anterior and posterior.Indirect restoration such as Veneer,inlay and onlay.Core buildups. Advantages:1.Solution of simplicity with universal shadeThe shade of DX.Universal Composite matches with VITA classic shade guide. Therefore single shade restoration can be applied as conventional & ordinary solution.2.Nano hybrid technologyDX.Universal composite is applying unique nano hybrid dispersion technology to maximize the load of fillers by controlling the size and distribution of particles. It dramatically increased composite physical properties and notably improved the smooth surface of restoration in comparision with traditional micro hybrid or hybrid composite.3.High Radiopaque.Fluoride releasing to prevent recurrent caries.Excellent handling.Extensive indications that suitable for most cases of restorations.Color Available: A1, A2, A3, A3.5,B1,B2 37% Acid Etching Gel Description:Dentex etching gel is a polymer thickened gel for use on enamel and dentin.This gel will effectively treat enamel and dentin, producing the necessary microretentive surface for successful bonding. The polymer thickener creates thixotropic properties, enhancing handling characteristics. The etchant rinse away cleanly and quickly, leaving no residue.Packages: Refill: 5 ml/syringe, Instruction X1Indications: Treat dentin and enamel, Treating agent on dental restorative material.1. Isolate tooth and then prepare the cavity in a conservative manner. clean the entire surface with a slurry of pumice and water.2. Apply etchant using a tip, a disposable syringe tip, or disposable brush tip. allow etchant to remain in palce for 15 seconds. etching time should be monitored with a stopwatch. begin timing at the end of application.Option: place etchant enamel first, then proceed to cover dentin, for a slightly longer enamel etching time.3. Rinse thoroughly (at least 5 seconds) to completely remover all traces of etchant.4. Remove exces moisture from the tooth and proceed with the application of etching gel, waiting for 10 seconds, then rise thoroughly. then apply adhesive Resin Kits INDICATIONS FOR USE:Direct restoration for all class caries.Restoration of teeth defect and veneer. Package Include:REFILL:Light Cure Composite: 4g/Syringe*5Syringe Needles : 5pcs/ box*1Total Etching Adhesive: 5ml/Bottle*1Etching Gel: 2.5ml/Syringe*1Applicators Brushes: 20pcs/box*1Net weight: 188.4gCOLOR: A1,A2,A3,A3.5,B1 FEATURES & ADVANTAGES:Unique dispersion technology ensure the filler evenly distributedRadioopaque and fluoride releasing Optimal polishability and high shade stability.Excellent handling, not sticky to instrument;Suitable for most cases of restoration, extensive indication of usage. INSTRUCTIONS：(1)Preparation: isolate and prepare tooth.(2)Cleaning: rinse the preparation with water.(3)Drying: gently air dry until there is no visible water.Do not allow enamel or dentin to dry for an excessive period of time.(4)Applying Dentex Self-Etching Light Cure Adhesive (DSA): dispense 1-2 drops of DSA into a mixing well, apply enough DSA to the entire preparation with a little brush until a shiny surface is achieved and then wait for 10 seconds (DSA should not be applied too much ). Use a gentle stream of air to evaporate the solvent for 5 seconds. (If using a non self-etching adhesive, an etching step should be used according to the manufacturer's instruction).(5)Cure: light cure for 20 seconds at 500±50mW/cm2. Keep the distance to exposure surface less than 4 mm.(6)Applying Dentex light cure composite (DLC): place selected DLC into cavity preparation following by light cure. According to following table, the curing time is recommended for different depth and color shades. In order to reduce shrinkage stress, for a large cavity, an increment filling is recommended. In general, 1-2 mm increments are placed into cavity preparation from different sides and the restoration is built incrementally. Each increment is light cured for 30 seconds.(7) Finishing: after light cure, adjust restoration.(8) Polishing: use polishing strip or disc to polish the surface WARNING: Do not use this product for patient who is allergy to methylmethacrylate. Do not use this product with any material contained eugenol. PRECAUTIONS: Methmethacrylate resins may cause skin sensitization in susceptible persons. In case of contact, wash skin with soap and water. In severe situation, get medical attention. ATTENTION: To an exposed pulp, a pulp capping material such as Calcium hydroxide may be used before using this product. STORAGE:Store at 25℃ or less in a cool and dry place and avoid direct sun exposure. Recap the syringe after use. DISPOSAL:After the product is used up, dispose it as normal medical rubbish. SHELF LIFE: 3 years DENTEX5 Bonding Adhesive： 1. 5th generation adhesive for all classes of direct restoration.2. Post and core bonding.3. Ceramic veneer/crown/inlay and other indirect restoration bondings.Advantages:1. High bonding strength and long lasting durability.2. Easy infiltrate to dentin tubules.Reduce the risk of post-operative sensitivity.3. Compatible with all light cure restoratives.4. Time saving and easy to use.Usage:1. Enamel bonding :30 seconds DX.Etch37 etch on enamel then apply 5th generation adhesive.2. Dentin bonding:15 seconds DX.Etch37 etch on dentin then apply 5th generation adhesive.Package:5ml/Bottle

Price: 12.58 USD

Location: Fullerton, California

End Time: 2024-08-31T02:09:55.000Z

Shipping Cost: 0 USD