Description: THIS IS AN ELGIN & REDLINE USA CAM KIT ASSEMBLED BY OUR EXPERT ENGINEERS TO CREATE THE HIGHEST QUALITY CAMSHAFT KIT AT AN AFFORDABLE PRICE. EVERY PART IN THIS KIT HAS A HIGH-PERFORMANCE SPEC RATING AND IS GUARANTEED TO BE OF THE HIGHEST OF QUALITY AND PERFORMANCE. This item is for an USA-made Elgin Sloppy Stage-3 hydraulic roller camshaft for GM Gen III and IV LS-series V-8 engines. P/N E-1840-P. This camshaft has 3-bolt camshaft sprocket mounting and rear integral LS1/LS6 camshaft sensor pickup. This cam cannot be used with AFM or VVT systems.We know there are cheaper performance LS cams available. Does anyone know the quality of these mostly Chinese camshafts? Most of these import camshafts are "cast" cams; meaning the cam is formed in a sand mold (much like the manufacturing process for low lift flat tappet cams.) At times, these cast cores have jagged, rough edges around the lobes and are prone to manufacturing imperfections.These Elgin cams are 100% USA-made from BILLET steel cores and precision machined. These billet steel cams can handle much more spring pressure and abuse than a typical cast camshaft. THIS LISTING WILL INCLUDE:1) AUTHENTIC ELGIN E1841P SLOPPY STAGE 3 CAMSHAFT 16) ENGINETECH HIGH-PERFORMANCE LS7 STYLE ROLLER LIFTERS (4) NEW ROLLER LIFTER GUIDES (16) DROP-IN BEEHIVE SPRINGS - .600" LIFT RATED The Spring Kit is a drop-in high performance spring kit for all OE LS cylinder heads and is rated for up to .600" lift. This spring kit uses all OE hardware, including seats, retainers, and locks and is 100% drop-in. The Spring are an ovate beehive spring that has increased loads, rates and frequencies for more aggressive cams. This is a full set of 16 springs. Drop-In Beehive Valve Spring Kit for all LS Engines - .600" Lift Rated Specs: Number of Springs Per Valve: Single Outside Diameter of Outer Spring (in): 1.290 in. Coil Bind Height (in): 1.140 in. Damper Spring Included: No Install Load: 130lbs Install Height: 1.800" Open Height: 1.175" Open Load: 318 lbs Spring Rate (lbs/in): 313 lbs./in. Inside Diameter of Outer Spring (in): 0.885 in. Valve Spring Style: Beehive CAM SPECS: We have a 30-day, no questions asked, return and exchange policy. If you want to return a product (in original condition) for any reason just send us a message in eBay and we will confirm it and send you the details and a pre-paid label.. Unlike a lot of companies, we never charge a restocking fee, we are just happy to have your business. The same applies for exchanges. If you want to do an exchange, we just require you to ship the product back to us, and then we will ship you the new parts when we receive/inspect them. Unlike every other company, we will pay for the return freight on the exchange, because we are just happy to have your business.
Price: 534.92 USD
Location: Carrollton, Texas
End Time: 2024-11-02T22:32:51.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Seller
Returns Accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money back or replacement (buyer's choice)
Brand: Elgin
Type: Camshaft
Interchange Part Number: Trick Flow TFS-30602003, Melling 22205
Manufacturer Warranty: 1 Year
Items Included: ELGINE E1841P CAMSHAFT, HIGH-PERFORMANCE LIFTERS, ROLLER LIFTER TREYS, BEEHIVE SPRINGS
Manufacturer Part Number: E-1841-P, E1841P, PAC1218, PAC-1218
Other part Numbers:: HL-2148 HL2148 L2281 25341990 HT-2148 E-1841-P
Material: BILLET STEEL
Country/Region of Manufacture: United States
Performance Part: Yes
California Prop 65 Warning: This product may contain chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm.
