Description: 】Product DetailsIntegrates RGB Interface LCD With 5-Point Capacitive Touch, Multiple Peripheral Interfaces 】FeaturesESP32-S3-Touch-LCD-7 is a microcontroller development board with 2.4GHz WiFi and BLE 5 support, integrates high-capacity Flash and PSRAM. Onboard 7inch capacitive touch screen can smoothly run GUI programs such as LVGL. Combined with various peripheral interfaces, suitable for the quick development of the HMI and other ESP32-S3 applications[] Equipped with Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency[] Supports 2.4GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 (LE), with onboard antenna[] Built in 512KB of SRAM and 384KB ROM, with onboard 8MB PSRAM and 8MB Flash[] Onboard 7inch capacitive touch display, 800×480 resolution, 65K color[] Supports capacitive touch control via I2C interface, 5-point touch with interrupt support[] Onboard CAN, RS485, I2C interface and TF card slot, integrates full-speed USB port[] Supports flexible clock, module power supply independent setting, and other control to realize low power consumption in different scenariosApplication ScenariosSupports Multiple PeripheralsSupports The Expansion Of Multiple Peripherals Via Sensor, CAN, RS485, And I2C Interfaces Application Examplefor reference only, please refer to the Package Content for the detailed part list】What's On Board 1)ESP32-S3N8R8The SoC with WiFi and Bluetooth, up to 240MHz operating frequency, integrated 8MB PSRAM and Flash2)7inch display panel connector3)Touch panel connector4)TF card slot5)USB Type-C port6)UART1 PortUSB TO UART Type-C port7)UART2 connectorUART1 and UART2 are the same UART, selected by switch8）Sensor header9)CAN header10）I2C header11）RS485 header12）3.7V single lithium battery PH2.0 header13）CAN terminal resistor selection14）RS485 terminal resistor selection15）UART selectionselect UART1 or UART216）BOOT buttonPress and hold while powering on for program burning17）RESET buttonI2C level selection18）3.3V / 5V19）DONELithium battery charging completed indicator20）CHGLithium battery charging indicator21)PWRPower supply indicatorPackage ContainsESP32-S3-Touch-LCD-7 x11.ESP32-S3-Touch-LCD-7 x12.HY2.0 2P to 2PIN male cable 10cm ×23.HY2.0 2P to 3PIN male cable 10cm ×14.HY2.0 2P to 4PIN male cable 10cm ×2
Price: 31.99 USD
Location: 广东省, 广东省
End Time: 2024-08-01T08:30:47.000Z
Shipping Cost: 8 USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
Return policy details:
Brand: Raspberry Pi
