Description: Powerhead Rebuild kits Outboard salvage items Outboard Fuel & VRO Pumps Other Brand Outboard Parts Outboard Motor Propellers Evinrude-Johnson Parts Mercury-Mariner Parts Nissan-Tohatsu Parts Vintage Antique Outboard Other COIN SHOP! NOTE: INTELLICTUAL THEFTVENDORS ON EBAY HAVE COPIED:MY ITEM TITLEMY DESIGNMY IMAGESMY DESCRIPTIONACCORDING TO EBAY THIS O K SINCE ITS NOT COPYRIGHTED. OF COURSE USING INFERIOR PARTSYOUR CHOICE - - MASTERTECH HAS BEEN PROVIDING MARINE PARTS ON LINE SINCE 1996. WE HAVE BEEN IN THE OUTBOARD MOTOR BUSINESS SINCE 1968 AND HAVE THE ANSWERS TO MOST ANY QUESTION YOU MIGHT HAVE REGARDING REPAIRING YOUR MOTOR. YOU GET EVERYTHING PICTURED IN THE 1st PHOTO ABOVE AS WELL AS THE SUPPORT OF THE MASTERTECH. DON'T PAY $150.00 FOR A VRO REPAIR KIT or $600.00 FOR A NEW VRO PUMP, JUST TOSS THE WHOLE MESS AND INSTALL THIS SIMPLE $55.00 SOLUTION! BASICALLY, THIS IS A BLOCK MOUNT FUEL PUMP TO INSTALL IN PLACE OF THE ORIGINAL VRO PUMP. WE'VE ADDED A LENGTH OF 5/16 FUEL LINE IN CASE YOU DAMAGE A LINE IN THE TRANSITION & SOME PROPER TY STRAPS TO SECURE THE LINES. JUST LAY ASIDE THE VRO OIL WARNING LEAD WIRES FROM THE HARNESS. TO INSTALL: • REMOVE YOUR OLD VRO PUMP AND OIL LINE INTO IT. • LOCATE AND REMOVE THE PULSE LINE AND FLAME ARRESTER FITTING FROM THE CRANKCASE AND PLUG WITH THE 1/8" PIPE PLUG IN THE KIT. * Note to installation images above: a few motors have the pulse fitting at the installation site rather than at the block. If yours is like this, just remove that fitting and continue as below. • LOCATE AND REMOVE THE 7/16 HEX BOLT PLUG ON PORT SIDE OF CRANKCASE, THIS IS YOUR NEW PRESSURE PULSE PORT. • MOUNT PUMP WITH SCREWS AND GASKET FURNISHED. • INVERT THE SMALL LOG MANIFOLD TO CARBS SO THAT THE INLET POINTS DOWN, USING FUEL LINE PROVIDED ROUTE FUEL OUT FROM PUMP TO LOG • REMOVE THE FUEL FILTER FROM THE FUEL IN LINE AND CUT TO SUIT, ATTACH TO FUEL INLET ON PUMP. (if you wish you can insert the filter in line between fuel connector and pump) NOW YOU HAVE THE SAME SYSTEM USED ON THE PRE-VRO AND COMMERCIAL MODELS! NOW JUST PRE-MIX OIL & GAS IN THE FUEL TANK AT 50:1 (ONE PINT OIL TO 6 GALLONS OF GAS) OTHER MODEL AND YEAR KITS AVAILABLE, INQUIRE. PICTURES ARE REFERENCE ONLY, ITEM PACKAGING MAY VARY BY VENDOR. ALL PARTS CARRY A 1 YEAR MANUFACTURERS WARRANTY USPS FIRST CLASS SHIPPING IN USA. PRIORITY MAIL AVAILABLE AT SMALL UPCHARGE. OUTSIDE THE US? NOT TO WORRY, WE SUBSCRIBE TO THE EBAY GLOBAL SHIPPING PROGRAM. Please Supply Your Motor Model and Serial Numbers at Checkout in the "ADD MESSAGE" section: so we can verify this application fits your motor DISCLAIMER The information provided herein is correct to the best of my knowledge, however the MasterTech makes no warranty, express or implied, regarding the use of, results of, or liability created from, application of this data. This information is disseminated in good faith, however MasterTech assumes NO LIABILITY whatsoever in regard to this service. The information, software, products, and services published in this listing may include inaccuracies or typographical errors. Changes are periodically added to the information herein. Mastertech may make improvements to this listing at any time. Parts ordered may or may not be in dealer stock at the time of order. Thank you for reading.
Price: 79 USD
Location: Milton, Florida
End Time: 2024-08-04T21:48:12.000Z
Shipping Cost: N/A USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Buyer
Returns Accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Brand: EMP Marine
Manufacturer Part Number: 02/50
Country/Region of Manufacture: United States
