Taryn Rose

Gecko G540 3 300oz Motors 18/4 Double Shielded Cable & Pro-Solderless Connectors

Description: Please read this entire listing to understand the gravity of this package.This package features the most advanced G540 motor, cable, connector, resistor package available. This is the only kit designed using DB9 EMI Ferrite filters to "Bullet Proof" your motors step, and direction signals from EMI noise penetration for maximum system stability.The kit features the following.3-Nema 23 300oz 3.5a (8mm) dual shaft 4 lead steppers for maximum durability, and compatibility for retrofits on the market. Wiring diagram is also included on the motor.3-3.3k 1/4 watt resistors to allow the G540 to reduce current to 70% current reduction mode when the system is at idle to reduce motor heating for increased longevity.30ft.of 18awg 4 lead double shielded copper core cable to assemble three 10ft motor cables. This cable features a shield drain wire which must be connected to a ground to drain EMI6- total DB9 solder type connectors to build the cable ends on your included 18/4 cable. (3 male, and 3 female DB9's are included with 6 DB9 covers)3- Pro-solderless motor connectors to eliminate the soldering hassle, an streamline motor hookup. 3- DB9 female to male "Plug N Play" EMI Ferrite filters to protect the motors step, and direction signals from EMI penetrationPlease review the overview video on this kit here Gecko G540 Bullet Proof Complete Motor Packages!! - YouTube Video will open in a new window Using the eBay App? Paste link into a browser window: [isdntekvideo] Motor Specs are listed below, as well as listed in the pictures above. Step angle 1.8° Current (A) 3.5 Resistance (Ohms) 1.2 Inductance per phase (mH) 1.8 L0 Dimension (mm) Refer To Pictures L1 Dimension (mm) Refer To Pictures Holding Torque(N.cm) (Oz In.) 300 Oz. In. Control Wires 4 Insulation Resistant 100 MOhm Min 500V DC Insulation Strength 50Hz 1Minute 500V Min Ambient Temperature -20°C~+50°C Temperature Rise 110°C Max. Shipping is free in the US. International shipping is welcome with eBay's Global Shipping Program as they offer us both the best protection. Please review the Global Shipping Policy to review your shipping quote as each is based on your specific location.

Price: 245 USD

Location: Spring Hill, Florida

End Time: 2024-08-07T19:29:59.000Z

Shipping Cost: 0 USD

Product Images

Gecko G540 3 300oz Motors 18/4 Double Shielded Cable & Pro-Solderless ConnectorsGecko G540 3 300oz Motors 18/4 Double Shielded Cable & Pro-Solderless ConnectorsGecko G540 3 300oz Motors 18/4 Double Shielded Cable & Pro-Solderless ConnectorsGecko G540 3 300oz Motors 18/4 Double Shielded Cable & Pro-Solderless Connectors

Item Specifics

All returns accepted: ReturnsNotAccepted

Brand: Edealers Direct OEM

MPN: N600 OZ

Recommended

Gecko G540 (4) Pro-Solderless Motor Connectors REV3 And (4 DB9 EMI Filters
Gecko G540 (4) Pro-Solderless Motor Connectors REV3 And (4 DB9 EMI Filters

$70.00

View Details
CNC Ethernet SmoothStepper Cable Package With Power Supply
CNC Ethernet SmoothStepper Cable Package With Power Supply

$70.00

View Details
 CNC Home Switch (Metal Design-Tight Tolerance) Built With Double Shielded Cable
CNC Home Switch (Metal Design-Tight Tolerance) Built With Double Shielded Cable

$50.00

View Details
Gecko G540 4 600oz Motor Kit 18/4 Shielded Cables & Pro-Solderless Connectors
Gecko G540 4 600oz Motor Kit 18/4 Shielded Cables & Pro-Solderless Connectors

$345.00

View Details
Gecko G540 4 300oz Motor Kit 18/4 Shielded Cables & Pro-Solderless Connectors
Gecko G540 4 300oz Motor Kit 18/4 Shielded Cables & Pro-Solderless Connectors

$265.00

View Details
CNC Double Shielded 22awg 2 Lead Cable (100ft.) (Bullet Proof Protection)
CNC Double Shielded 22awg 2 Lead Cable (100ft.) (Bullet Proof Protection)

$150.00

View Details
Gecko G540 4 300oz Motors 18/4 Double Shielded Cable & Pro-Solderless Connectors
Gecko G540 4 300oz Motors 18/4 Double Shielded Cable & Pro-Solderless Connectors

$310.00

View Details
Gecko G540 DB25 Pass Through EMI Filter (Bullet Proof Signals)
Gecko G540 DB25 Pass Through EMI Filter (Bullet Proof Signals)

$15.00

View Details
CNC Complete Grounding System (Bus Bar, 110v Plug, Professional Ground Strap)
CNC Complete Grounding System (Bus Bar, 110v Plug, Professional Ground Strap)

$100.00

View Details
CNC Double Shielded 22awg 2 Lead Cable (10ft.) (Bullet Proof Protection)
CNC Double Shielded 22awg 2 Lead Cable (10ft.) (Bullet Proof Protection)

$22.00

View Details