Description: 2nd Order (12dB / Octave) Crossover Board - can be configured as either a Highpass or Lowpass. Custom printed circuit boards designed for general purpose DIY speaker crossovers or rebuilding crossovers. These boards are designed to give a clean layout and allow for easy crossover assembly. *NOTE - No crossover components are included* The 2nd order crossover board can be used as either a highpass or lowpass crossover filter depending on which pads you use as the input and negative or ground connection. For highpass use one of the B pads as the positive input and use the A pads as the negative input and negative output to the speaker. For Lowpass use one of the A pads as the positive input and use the B pads as the negative input and negative output to the speaker. The output pad is used as the positive output to the driver in either configuration. This board is designed to support a variety or component sizes with two capacitor positions available for smaller or larger size capacitors and the inductor or coil can be of air core or laminated I-Core design. These boards measure 3.4" x 3.0" and feature large solder pads and copper traces for great electrical connectivity. Includes: 1x 2nd Order Crossover PCB 4x Snap in PCB standoffs. 4x Mounting screws (screw finish may vary). Assembly: Glue components to the required positions on the board (hot melt glue works great), Use non metallic cable or zip-tie to further secure the coil and solder the leads and input/output wires to the pads on the bottom of the board.
Price: 6 USD
Location: Millbrook, Illinois
End Time: 2023-10-15T20:20:23.000Z
Shipping Cost: N/A USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Seller
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money back or replacement (buyer's choice)
Compatible Brand: Universal
Brand: Unbranded/Generic
Type: Crossover
Compatible Model: General Purpose DIY
