MPPT Solar Charge Controller 20A 40A 60A Solar Controller MPPT 12V 24V Solar PV

Description: PVBEYORND MPPT Solar Charge Controller 20A 40A 60A Solar Controller MPPT 12V 24V Solar PV Regulator Fit for Lead-acid/Lithium Product Features： 1. Using advanced dual-peak or multi-peak tracking technology, when the solar panel is shaded or part of the solar panel is damaged, the I-V curve will have multiple peaks, and the controller can still accurately track the maximum power point 2. Built-in maximum power tracking algorithm can significantly improve the energy utilization efficiency of the photovoltaic system, which is about 25% higher than the traditional PWM charging efficiency 3. Combining multiple tracking algorithms, it can accurately track the optimal working point of the I-V curve in a very short time. 4. The MPPT tracking efficiency can reach up to 99.9% 5. The circuit energy conversion efficiency is as high as 98% with the use of advanced digital power technology 6. Supports different types of battery charging programs such as colloidal batteries, sealed batteries, open batteries, lithium batteries, etc. 7. It has a current limiting charging mode. When the power of the battery panel is too large and the charging current is greater than the rated current, the controller automatically reduces the charging power to make it work at the rated charging current 8. It can support instantaneous high current startup of capacitive loads 9. Support automatic identification of battery voltage 10. It has a fault LCD display to facilitate users to determine system faults 11. Built-in over-temperature protection mechanism. When the temperature exceeds the set value of the device, the charging current decreases linearly with the temperature, thereby reducing the temperature rise of the controller and avoiding high temperature damage to the controller 12. It has a temperature compensation function, automatically adjusts the charging and discharging parameters, and increases the service life of the battery 13. Complete electronic protection function 14. It uses a metal shell with better heat dissipation performance 15. Lithium battery 0V charging functionWarm Tips: 1. Please read this manual in detail before operating the controller. 2. It is recommended that a suitable fuse or circuit breaker be installed outside the controller. 3. Before installing and adjusting the controller's wiring, be sure to disconnect the fuses or circuit breakers near the PV array and battery terminals. 4. After installation, check that all wiring connections are tight to avoid dangerous heat buildup from incorrect connections. 5. The USB charging function requires the solar charging controller to be turned on and the "ESC" button to be turned on so that the USB can provide current. 6. Currently, the 20A device is not equipped with a fan for cooling because the current is too low. Both the 40A and 60A devices are equipped with dual fans for coolingPacking List： 1 x MPPT Solar Charge Controller 1 x Instruction manual 1 x Fixing screwReliable Quality, High Quality Products: 1: 40A and 60A models are equipped with dual high-speed fans to continuously cool the equipment, extend the service life and ensure the safety of product use 2: Pure copper coils are equipped with high-quality transformers and innovative MPPT technology. It truly achieves low power consumption and 98% high conversion efficiency 3: The back uses a pure metal shell with good heat dissipation performance and better fixation in suitable scenes without worrying about corrosion caused by long-term useCompatible with various batteries: Compatible with: Lifepo4 lithium battery / lead-acid battery / sealed battery / open battery / gel battery, etc. The product has low power consumption and high conversion efficiency MPPT tracking efficiency：99% Circuit energy conversion efficiency：98%Multiple Protections： Over discharge protection Over charge protection Overload protection Short circuit protection Reverse connection protection Reverse current protection High temperature protectionBasic Data： Below we will introduce various data about this MPPT solar controller in detail in order, namely: 1. Product model 2. System voltage 3. No-load loss 4. Maximum solar input voltage 5. Battery voltage 6. Maximum power point voltage range 7. Rated charging current 8. Rated load current 9. USB output 10. Maximum input power of photovoltaic system 11. Conversion efficiency 12. MPPT tracking efficiency 13. Temperature compensation coefficient 14. Working temperature 15. Protection level 16. Net weight 17. Gross weight 18. Electromagnetic compatibility 19. Altitude 20. Product sizeProduct Description： 1、LCD screen 2、Operating keys 3、Fan ventilation 4、USB output 5、Solar panel port 6、Battery port 7、Load portInterface Introduction： ESC：Switch load on and off (manually switch load on and off); setting interface, exit setting; Up button：Scroll up on the main interface to view parameters; in setting mode, Select Parameters - Add Down button：Scroll down the main interface to view parameters; in setting mode, Select Parameters - Reduce SET：Enter settings/confirm/save, exit settings without any key press for 10 secondsMPPT SOLAR CHARGE CONTROLLER Install Procedure 1、Connect 12V or 24V battery to solar controller 2、Connect 18V or 36V solar panel to solar controller 3、Connect 12V or 24V load to solar controller Uninstall Procedure 1、uninstall solar panel from solar controller 2、uninstall load from solar controller 3、uninstall battery from solar controllerSchematic diagram of PV system connectionIntroduction to Maximum Power Point Tracking Technology Taking the 12V system as an example, because the peak voltage (Vpp) of the solar panel is about 17V and the battery voltage is about 12V, the voltage of the solar panel is about 12V when the general charging controller is charging, and the maximum power is not fully exerted. The MPPT controller can overcome this problem and adjust the input voltage and current of the solar panel from time to time to achieve the purpose of maximum input power. Compared with the traditional PWM controller, the MPPT controller can exert the maximum power of the solar panel, so it can provide a larger charging current. Generally speaking, MPPT can improve the energy utilization rate by about 25% compared with the PWM controller.Solar panel output characteristic curve At the same time, due to different ambient temperature and light conditions, the maximum power point often changes. Our company's MPPT controller can adjust parameters according to different conditions at any time to keep the system near the maximum working point. The whole process is completely automatic and does not require any adjustment by the user.

Price: 69.59 USD

Location: Shenzhen

End Time: 2024-12-28T12:33:21.000Z

Shipping Cost: 0 USD