Pair of Promaster Tower Brackets for use with 8020(TM) 15 series crossbars

Description: Patent Pending. Made in the USA! Quantity of 1 will include 2 Tower Brackets and hardware. Cross bars sold separately. Tower brackets for Promasters, laser cut, CNC formed, clear anodized or black anodized tower bracket kits for using with 8020 15 series crossbars to mount solar panels to OEM roof rails found on Sprinter and other vans. Included the attachments. * Black Anodizing may fade over time due to sun exposure. These brackets are compatible with the Fiamma Awning. The distance between our Towers is 52.5" Crossbars can be found here: https://www.ebay.com/itm/144323850607 Do not exceed 20 lbs load per tower. Not intended as a rack for hauling large or heavy items. Do not exceed total roof top weight allowed by vehicle manufacturer. Please contact us with any questions about how to use this product. select 'square' for use with 15 series square profiles select 'rounded' for use with 1517 rounded profile select 'extended' if the crossbar needs to extend beyond the tower. Compatible with both rounded and square profiles. This version does not cap the end of the crossbar so separate caps can be purchased with the 80/20. Maximum extension beyond tower not to exceed 6". Not suitable for mounting heavy awnings not otherwise supported. Please take a look at our support tabs for mounting solar panels to the cross bars, https://www.ebay.com/itm/141878685652 DISCLAIMER Failure to follow warnings below may allow rack to come loose from vehicle and cause injury or death. If in doubt, please submit rack plans or photos for evaluation prior to final installation or use. Van owner and/or installer assumes all risk associated with roof top mounted items and/or components. Van owner and/or installer recognizes and agrees that this product, and each of its component parts, is sold “as is” and that seller makes no representation or warranty of merchantability that the product is fit for any particular purpose. IMPORTANT SAFETY WARNINGS: * Do not exceed 20 lbs load on each tower. * Tower spacing down length of roof not to exceed 30" * Do not allow solar panels to overhang side of roof. * Do not extend any component more than 4" beyond forward or rearward most towers. * Do not extend crossbar more than 4" beyond slot in tower * Do not exceed total allowable load by vehicle manufacturer. * Use all available attachment points on van roof. * Do not install roof top deck or climb on rack. * Check and tighten all hardware after 100 miles and every 500 miles there-after. * Check overall integrity of rack every 500 miles or monthly whichever is more frequent. Assembly: * Refer to diagram. * Use all parts and hardware. * Tab that bridges or passes through slot in tower must be used. DO NOT OMIT TAB * Torque 5/16-18 hardware to 8 ft-lbs * Use Loctite blue on any connection without toplock nut.

Price: 134 USD

Location: Hood River, Oregon

End Time: 2024-08-20T00:26:15.000Z

Shipping Cost: 0 USD

Product Images

Pair of Promaster Tower Brackets for use with 8020(TM) 15 series crossbars

Item Specifics

Return shipping will be paid by: Buyer

Returns Accepted: Returns Accepted

Item must be returned within: 30 Days

Refund will be given as: Money Back

Return policy details:

Country/Region of Manufacture: United States

California Prop 65 Warning: WARNING: This product contains chemicals known to the state of California to cause cancer, and birth defects or other reproductive harm. For more information: www.P65Warnings.ca.gov

Promaster, Van, roof, Towers, bracket: 8020, 80/20, solar, panel

Brand: Impact Products

Warranty: No Warranty