Shoei Z8 RF-1400 NXR 2 FAUST TC-5 Full Face Motorcycle Helmet Riding Motocross

Description: Welcome to Selly Studio's Shoei Z8 RF-1400 NXR 2 FAUST TC-5 Full Face Motorcycle Helmet Riding Motocross Racing Motobike Helmet Main CharacteristicsAero ShapeRefined Aero Shape realizing both Design and PerformanceHigh Speed Riding splitting an Air.Together with a rider and a motorcycle, a helmet also attacks a wall of air.Aerodynamics of a helmet affects directly a load on neck of a rider especially in high speed riding.SHOEI improved aero shape firmer and more practical by repeating tests in large wind tunnel facility.Aerodynamics of Z-7Compared with Z-6, DRAG and LIFT are improved by 5%(*) and 1%(*) respectively.*Values are measured in in-house wind tunnel experiment facility. Quietness"Quietness = Comfort" experienced especially in Long RidingA load on a rider in long time high speed riding is not only a wind pressure. A wind noise invading into a helmet disturbs rider's concentration and causes fatigue when it continues long time.Aero shape and airtight shield system minimize occurrence of wind noise itself and airtight interiors block invasion of noise. And also, equipping removable ear pad in ear space of a helmet realized substantial decrease of wind noise.Double and triple devices against occurrence and invasion of noise restrain rider's fatigue in long time riding substantially.Independent lips of window beading in upper and side portions made it more elastic and improved close contact with a shield. An improved air tightness avoids occurance of wind noise caused by invasion of air.Removable ear pad is equipped in ear space to avoid invasion of wind noise. Plastic plate in ear space puching processed to avoid echo of noise inside.Comparison of Wind Noise under Circumstance equivalent to Rinding as 100km/hCompared with Z-6, wind noise is restrained more in all frequency ranges in Z-7.*Values are measured in in-house wind tunnel experiment facility.Shield SystemNewly Developed CWR-1 ShieldRibs on top and bottom in the same height as thickness of PINLOCK® fog-free sheet enhance its close contact with a shield and improve rigidity of a shiled.CWR-1 Shield which secures Natural and Clear VisionNewly developed "CWR-1 Shield" provides you with natural and clear vision with improved optical characteristics and minimum distortion realized by applying best and different radius and thickness in each area of a shield. And also, ribs on top and bottom of a shield improve rigidity of a shield and eliminate bending of a shield by wind pressure and twisting in opening or closing. High quality is realized also in airtightness in high speed riding and easy handling of opening and closing.Further Advanced Shield Opening and Closing SystemA shield system securing easy and firm fixing and removing as well as high airtightness in variable axis double action mechanism was also renovated in every aspect in Z-7.Review of a spring ratio of shield base largely improved smoothness of opening and closing as well as airtightness in fully closed position. When a shield is fully closed, a hook located in rear side of shield nob is locked to a shell and avoids unexpected opening or motions of a shield by wind pressure maintaining high airtightness.A shield lock mechanism is equipped in a nob in bottom of a sheild and hold a shield firmly when it is fully closed.Shield base slides fore and rear in 5 steps by rotating a dial. Airtightness of a shiled can be fine adjusted in both sides by maximum 1mm.InteriorsComfortable fitting and firm hold realize high quality ridingComfortable fitting, essential to comfortable riding, is secured by interior system which is newly adopted in Z-7.A shape or rigidity of bottom of shell may affect may affects tight feeling when wearing or removing a helmet. A cheek pad integrated with distinctive cut line in shell side softened tight feeling in wearing and removing, and improved easiness of motions around neck for rear checking. And also, 3D shaped polyurethane foam pad realized a cheek pad in high volume at the bottom which supports cheek softly and, at the same time, avoids invasion of wind or noise.3D Full Support Inner Type IV is applied to center pad. While soft napping material is applied to an area which touches a skin in wearing or removing, high moisture absorptive advanced material is applied to an area where effective absorption of sweat is expected while wearing. It realized both soft fitting and comfortable wearing. And also, red mesh material is used partially as an accent to express sporty impression by grey and red colors.For part which will be affected friction damage consists of raised fiber. For part of necessity to absorb sweat consist of highly moisture absorptive nylon.Distinctive cut line eases wearing and removing and softens tight feeling.Ventilation SystemThe more you ride, the more you feel wind and coolnessAir intakes are placed in a center of forehead and both sides and riding wind is lead straight to inside of liner realizing high ventilation performance where a rider may feel wind even inside a helmet. Air outlets with spoiler performance stabilize a helmet in high speed riding and exhaust hot air effectively through 4 outlet holes.E.Q.R.S.It is very difficult for a third party to remove a helmet from a rider in an accident.Exclusive tab is equipped to cheek pad of Z-7.By pulling this tab, a relief party may remove a cheek pad and remove a helmet easily without hold on a cheek.*When removing cheek pads for a usual maintenance, do not use E.Q.R.S. tabs.Pull Out Red Tab SpecificationsHign-concerned ChemicalNoneWeightabout 1.4kgHelmet MaterialAbsQuality CertificateDot,Ece-R22/05Helmet StyleFull FaceGenderUnisex Item TypeHelmets ModelZ8/Z-8/NXR 2MaterialComposite fiberSizeS/M/L/XL/XXLLens colorclear,black,rainbow,silver,gold,purple,blue,red gold,revo red goldstyleFull helmetApplicable peopleAdultWeight1550g Head circumference54cm-62cmApplicable seasonAll seasonsCertification informationDOT/ECE Our Policy100% Genuine Product Guarantee & Express Shipping AvailableUsually, We Ships within 24hours100% Original ProductsEasy Return & exchange availableCustomer satisfaction is 100% with great communication with us.Custom Charge is yours**We are not liable to pay any import duty or taxes, if the same charged by the customer’s country**ShipmentsWe do ship the items worldwide and it will take 20-25 days to reach destination.For standard shipping we do use Aramex, Fed-Ex and DHL for quick movement of item.If the item does not arrive and destination within this period so, please contact us.Any item on customer’s specification, will take some extra time to customize the item as per customer requirement.Remote areas or places or cities take extra 3-5 days for shipment to be delivered.We are not liable to pay any import duty or taxes, if the same charged by the customer’s country. PaymentsWe accepted the payment through PayPal Also because, it's easy way to online transaction.The item price and shipping cost is mentioned with each item and there is no any other hidden charge.About WarrantyWe provide 12-months free maintenance. The buyer should return the product in the original conditions to us and should bear the shipping costs for return. If any part is required to be replaced, the buyer should also pay for the costs of the parts to be replaced. Before returning the items, please confirm the return address and the logistics method with us. After you give the items to the logistic company, please send us the tracking number. As soon as we receive the items, we will repair or exchange them ASAP. About ReturnsWe do our best to serve our customers the best that we can.We will refund you if you return the items within 15 days of your receipt of the items for any reason. However, the buyer should make sure that the items returned are in their original conditions. If the items are damaged or lost when they are returned, the buyer will be responsible for such damage or loss, and we will not give the buyer a full refund. The buyer should try to file a claim with the logistic company to recover the cost of damage or loss. ** The buyer will be responsible for the shipping fees to return the items. ** About FeedbackYour satisfaction and positive feedback are very important to us. Please leave positive feedback and 5 stars if you are satisfied with our items and services.

Price: 279.99 USD

Location: FARIDABAD, HARYANA

End Time: 2024-10-16T18:19:37.000Z

Shipping Cost: 0 USD