Solar Panel Y / T Branch Cable Connection Waterproof Adapter Connector Extension

Description: 1/5/10Pairs MC4 Connector Rated voltage: 1000 V Rated impulse voltage: 1000 V Test voltage: 6 kV (50 Hz) Suitable for cables: 10, 12, 14 AWG (2.5mm2/4mm2/6mm⊃2;) Rated current: 24A - 14 AWG (2.5mm⊃2;), 30A - 12 & 10 AWG (4mm⊃2; & 6mm ⊃2;) Protection grade: IP67 Contact material: Copper, silver-plated Insulation material: PC/PA Operating temperature: -40°C ~ +90°C Safety class: II Flame class: UL94-V0 Contact resistance: ≤5mΩ Insertion / Withdrawal force: ≤50N / ≥50N 5Pairs/10Pairs with 2 Spanner 1 to 2 Y Type MC4 Connector Rated current: 20A(4mm²)30A(6mm²)Rated voltage: 1000V DCContact resistance: <2mΩInsulation resistance ： >500mΩSuitable single core cable section: 2.5mm2, 4mm2, 6mm2Cable outer diameter: Φ5mm ～Φ 7mmConnector insulation material: PPODegree of protection: IP67Safety: IIOperating temperature range: -40 ~ +105 ℃ T-Type Male/Female Solar Panel Cable Connectors: 2 Branch: Insulation Material: PPOcolor: blackContact Material: Copper,Silver PlatedRated Current: 50ARetaed Voltage: 1000 VDCTest Voltage: 6000 VDC (50Hz,min)Protection Class: IIContact Resistance: 0.5 mΩTemperature Range: -40℃ to +90℃Protection Degree: IP67/IP2Flame Class: UL94-VOInsertion force: ≤ 50NWithdrawal force:≥ 50N 3 Branch:T Type 3 Branch Solar Panel Cable Photovoltaic Connectors MFFF FMMM IP65Color : BlackMaxi operating current : 30A;Temperature : -40 ~ 90;Safety class :CIass II;Waterproof rating : IP65;Maximum voltage : DC1000V. 4 Branch :AC/DC Solar Branch Connectors MFFFF FMMMM IP65Color : BlackMaxi operating current : 50A;Temperature : -40 ~ 90;Safety class :CIass II;Waterproof rating : IP65;Maximum voltage : DC1000V. 1 Pair 12AWG 4mm² MC4 1M/2M/3M/5M Connector Cable Solar cable 1x in red and 1x in black4mm² Highly flexible and designed for high mechanical load Features: This cable has a male connector on one end and a female connector on the other end made with High Quality Silicon wire. * Use them to extend module output cables or cut anywhere along the wire to obtain the needed length of male and female cable to run from string of modules to a combiner box or to a longer cable. * TUV certified, brand new, water /weather proof rubber seal that can ensure excellent electrical contact for life time service. * Electron-beam cross-linked compounds * UV and ozone resistant * Hydrolysis resistant * High temperature resistant, the materials do not melt or flow * Good cold flexibility Descriptions: * Nominal Voltage: 1000 V DC * Temperature rating: 40C up to + 125C * Ambient temperature: 25 years * Waterproof level: IP67 * Cable Size: 12AWG * Cable length: 1m/2m/3m/5m Package included: Please select the wire type and cable length 1x Black solar panel extension cable connector 1x Red solar panel extension cable connector PWM Solar Charge Controller Features: 1.Build-in industrial micro controller. 2.Big LCD display,all adjustable parameter. 3.Fully 4-stage PWM charge management. 4.Build-in short-circuit protection,open-circuit protection,reverse protection,over-load protection. 5.Dual mosfet Reverse current protection ,low heat production. Display: MENU:switch between different display,or to enter/exit setting by long press. UP: press to increase value. DOWN:presss to decrease value. Setting: 1.press the [Down] button to ON/OFF load manully at main display. 2.the work mode is working as below: [24H] load output 24hours [1-23H] load on after sunset and closed after setting hours [0H] Dusk to dawn MODEL ICharger PWM 10A ICharger PWM 20A ICharger PWM 30A ICharger PWM 40A ICharger PWM 50A ICharger PWM 60A Battery Voltage 12V 24V Auto Charging Current 10A 20A 30A 40A 50A 60A Discharging Current 10A 10A 10A 20A 30A 30A Max Solar input 50V(for 24V battery) 25V(for 12V battery) Equalization 14.4V(Sealed) 14.2V(Gel) 14.6V(Flood) Float charge 13.7V(defaul,adjustable) Discharge stop 10.7V(defaul,adjustable) Discharge reconnect 12.6V(defaul,adjustable) Charge reconnect 13V Voltage of open light Solar Panel 8V(Light lights delay) Voltage of close light Solar Panel 8V(Light off delay) USB output 5V/3A Self-consume <10mA Operating temperature -35°C~+60°C Size 133.5*70*35mm 133.5*70*35mm *all red color voltage X2 ,while using 24V system. Connection: 1.Connect the battery to the charge regulator - plus and minus. 2.Connect the photovoltaic module to the regulator - plus and minus. 3. Connect the consumer to the charge regulator - plus and minus. The reverse order applies when deinstalling! An improper sequence order can damage the controller! DC 12V/24V MPPT Auto Switch MPPT Solar Charge Controller As the most high-end and advanced solar charge controller, it charges the battery with the max power, MPPT tracking efficiency is 99%, and the whole system has a high power generation efficiency of 97%.Features:This product provides short-circuit protection,open-circuit protection, reverse protection, overload protection.Automatic focusing MPPT tracking charging, high charging efficiency, non-stop detection during charging, bidirectional focusing tracking.MPPT solar controller can detect the voltage and current of the solar panel in real time, and constantly track the maximum power, so that the system can always charge the battery with the maximum power.The tracking efficiency of MPPT is 99%, and the power generation efficiency of the whole system is up to 97%. Moreover, the system has excellent battery management, including MPPT charging, constant voltage average charging and constant voltage float charging.Specifications:Battery voltage: 12V/24V Auto AdaptMaterial: ROHS+ABSItem color: blue+blackCharge current: 30A/40A/50A/60A/100A (optional)USB output: 5V 2AItem size: 170 * 95 * 40 mm / 6.69 * 3.74 * 1.57 inItem weight: 260 g / 9.17 ouncePackage size: 175 * 100 * 45 mm / 6.89 * 3.94 * 1.77 inPackage weight: 295 g / 10.41 ounceNotes:1.What is MPPT? Automatic load tracking aggregation. 2.Why "Only works with the battery connected, turn on the solar panel charges the battery, charge does not work"? Why is it less than 100A?We are a current-focus MPPT with two constantan wires designed to detect current and maximum open-load when more 1A.This technology is our patent practice, and has been recognized by the state, with a special patent certificate of invention.There is no such technology on the market. Compared with other MPPT MPPT-inductive buck-boost type, the same solar charging condition, our current-focusing MPPT current tracking efficiency is higher, because of the power loss caused by the booster and the step by step down.In fact, the effectiveness of very low light charging is very low because the input power is very small. And our MPPT can also increase the load under relatively low illumination. Our MPPT is straight-through type. When the current is greater than 1A, it will not be tested. The chain will be charged directly. Only when it is charged to 95% of the battery, will it slow down and protect the battery.Package list:1* Solar charge controller

Price: 3.99 USD

Location: Shen Zhen

End Time: 2024-01-04T10:33:29.000Z

Shipping Cost: 0 USD