Thompson Center T/C Compass Trigger Job Reduced Pull Spring Kit

Description: T/C COMPASS TRIGGER SPRING KIT by BELLM TCsNOTE: This spring kit is for an unmodified by T/C Thompson Center Compass, it is NOT a drop in without modification to the springs to the Compass II or Compass Utility. We are working on a new spring kit for these applications and hope to have them available early 2023. Brought to you by the PROS at BELLM TCs, our new COMPASS trigger spring kit will turn that so called budget rifle into a real shooter! The T/C COMPASS is a tremendous value and loaded features we really like BUT the factory trigger is a bit heavy for you to shoot your best group. The new BELLM TCs spring kit is a drop in spring kit that will reduce your trigger pull and provide noticable improvements on paper. You will be amazed at the difference our spring kit makes! We will have a video up soon showing how we turned our Compass into a real treasure by installing our spring kit, quality optics with EGW scope base and a custom BOYDS stocks guaranteed to turn heads. Stay tuned for that.The Compass trigger is adjustable but only down to a little over 4lbs. For some that may be acceptable but for us we are STICKLERS for a nice light consistent trigger. We went to work on the design of our springs and just like our Encore spring kits we discovered that having just one spring wasn't enough to reduce the pull weight down to as light as we prefer for bench rest shooting. So we manuactured two different pull weight springs, one for controlled shooting ie bench rest and the other for general hunting/shooting. Lets face it, not everyone like a hair trigger so we allow you to choose what you prefer. If you are unsure which one to buy we sell the trigger return springs separate.Your kit will come with a sear spring, a secondary trigger return spring, and your choice of a heavy or light MAIN trigger return spring. Save money and choose the kit that works best for you, or add the alternate spring for fine tuning. The heavy main spring should provide a pull weight just under 3 lbs where the light main spring was just under 2 in our testing. This is an approximate pull weight but with proper setup as demonstrated in our instructions you can obtain a perfectly light trigger. The LIGHT trigger is not for everyone, so use caution when installing and only use in CONTROLLED shooting environments. - Reduced measurable trigger pull weight- Reduced over travel - Field and Range tested NOTICABLE improvement in accuracy!- Improved FEEL you will be proud of- Affordable solution to reducing trigger pull- Learn your weapon and Do It Yourself- Free tech support and youtube install video- We install what we sell, if you don't feel comfortable doing the work send it to us.- Designed by T/C pros for over 40 years, MADE IN USA DISCLAIMER and WARNING! You must be 18 years of age or older to purchase this product. We advise that all BELLM TCs LLC products be installed and/or inspected after installation by a qualified gunsmith. Modifying sear and engagement surfaces are done at your own risk and we highly recommend that you DO NOT modify, hone or polish any sear or engagement surfaces with anything but the BELLM TCs LLC sear hone and polishing stones and only follow the BELLM TCs LLC instructions. Reducing trigger pull weight below 1.5 lbs of pull is NOT recommended due to the manufactures design, there is a chance that dropping the firearmcould cause a discharge at ANY reduced pull weight. It is your responsibility to inform, educate, and warn anyone using your modified weapon as to it's design, function, and its unique and safe handling. Before installing check with all STATE and FEDERAL laws, there may be a law that prohibits you from modifying your firearm and it is up to you to know these laws and abide by them. By ordering and installing this product or any BELLM TCs LLC product you agree to take FULL RESPONSIBILITY for any and all legal, health, and warranty issues that may occur and you agree to hold BELLM TCs LLC harmless for anything that may occur from the use or installation of this product.

Price: 20 USD

Location: Olathe, Colorado

End Time: 2024-01-02T04:19:46.000Z

Shipping Cost: 0 USD