Three-Phase DC 6-24V Brushless BLDC Motor with Hall Speed Controller Driver

Description: Features: This driver is a DC three-phase brushless with Hall driver board. The motor needs to with Hall and the wiring sequence to work normally. Note: 1. Because the forward and reverse rotations are hard commutation without delay and also high-speed braking will have a great impact. Therefore, it is not recommended to operate these two functions when the high voltage is running at full speed. It is necessary to reduce the speed to 50% or below first. Forcible operation may damage the power tube and chip. 2. This module has low power (Max 100W). Recommended Power: 12V Features: This driver is a DC three-phase brushless with Hall driver board. The motor needs to with Hall and the wiring sequence to work normally.Note:1. Because the forward and reverse rotations are hard commutation without delay and also high-speed braking will have a great impact.Therefore, it is not recommended to operate these two functions when the high voltage is running at full speed.It is necessary to reduce the speed to 50% or below first. Forcible operation may damage the power tube and chip.2. This module has low power (Max 100W). Recommended Power: 12V <=42W. 24V <=84W. Product parameters:Product name: Three-phase DC brushless with Hall driverWorking voltage: 6-24V (limit 28V)Drive Current: Rated 3.5A Peak 4ACurrent-limiting and locked-rotor protection: current-limiting protection when the current exceeds 4A, And the motor is locked-rotor for 5 seconds for shutdown protectionProduct size: 33MM* 33MM* 13MM (L*W*H)Weight: 12.5g (including wire) Package Included: 1x Speed Controller Driver

Price: 10.5 USD

Location: hongkong

End Time: 2024-08-11T10:45:35.000Z

Shipping Cost: 2.99 USD