Water Electrolyzer Electrolysis Instrument Water Purity Meter PH Tester USA

Description: Specification: Name: water electrolyzer Material: ABS + aluminum and iron Host size: 10 x 4 x 3cm Cable length: 70cm Length of metal rod: 6.5cm Rated voltage: 110-220V Socket type: American standard Application: Living drinking water, water purifier test Package includes 1 x Electrolytic Cell 2 x Iron Rods 2 x Aluminum Rods Specification: Name: water electrolyzer Material: ABS + aluminum and iron Host size: 10 x 4 x 3cm Cable length: 70cm Length of metal rod: 6.5cm Rated voltage: 110-220V Socket type: American standard Application: Living drinking water, water purifier test Use steps 1. Prepare water for testing-take two transparent glasses with capacity of 100-150 ml, one with ordinary water (well water or tap water) and the other with mineral water or deeply purified water (such as pure water or distilled water) and place them side by side on the table. 2. Prepare for the test - Place the two ends of the electrolyzer into the two glasses and plug in the 220 volt power supply. 3. Test - Press the power switch button on the electrolyzer to the on position to start the test. Typical test time is 30 seconds. When finished, press the power switch to the off position and remove the electrolyzer. Safety Warning Do not put your hands on the electrodes while the power is on; do not put your fingers in the test water; do not allow children to play with the electrolyzer. When the electrolyzer is finished using, dry the electrodes with a dry cloth, wipe the water from the magnetic poles with a fine gauze cloth and store it properly. Package includes 1 x Electrolytic Cell 2 x Iron Rods 2 x Aluminum Rods On Dec 25, 2023 at 01:47:59 PST, seller added the following information:

Price: 9.5 USD

Location: Humble, Texas

End Time: 2024-02-14T01:59:45.000Z

Shipping Cost: 0 USD