XH-W3002/XH-W3001 Digital LED Temperature Controller Thermostat Control Switch

Description: XH-W3001 Product parameters: Product name: Microcomputer temperature controller Product Model: XH-W3001 Supply voltage: 12V/220V Temperature measurement range: -50℃~110℃ Temperature control range: -50℃~110℃ Temperature control accuracy: 0.1℃ Load power: 120/1500W Measurement input: NTC10K waterproof probe L=1 meter output type: direct output Output capacity: max 10A Installation hole distance: 73mm (diameter 4mm) Appearance size: 60*45*31mm Instructions To set the startup temperature: Press the up button once, the startup temperature will be displayed, long press the up button for about 3 seconds, the startup temperature number will flash, and the desired temperature value can be set by the up and down buttons Set stop temperature: Press the down button once to display the stop temperature, long press the button for about 3 seconds, the stop temperature number will flash, and the desired temperature value can be set by the up and down buttons reset: When the power is on, press and hold the up and down keys at the same time, the digital tube displays 888 and then automatically jumps to the detection temperature, that is, restores the factory settings XH-W3002 Specification: Product name: Microcomputer temperature controller Product Model:XH-W3002 Temperature measurement range: -50~110℃ Temperature control range: -50~110℃ Temperature measurement accuracy: ±0.2℃ Temperature control accuracy: ±0.1℃ Measurement input: NTC10K L=1 meter waterproof probe Input power: 12/220V Output power: 120/1500W output type: direct output Output capacity: max 10A Installation hole distance: 73mm (diameter 4mm) Appearance size: 60*45*31mm Set using: Code and function introduction P0 set startup temperature Press the setting button once to enter the internal menu, the default display is P0, press the setting button again, and set the required startup temperature by pressing the up and down buttons. P1 set stop temperature Press the setting button once to enter the internal menu, the digital display is P0, switch to P1 by pressing the up and down buttons, press the setting button again, and set the desired stop temperature by pressing the up and down buttons. P2 Set temperature correction Enter the internal menu in the same way, switch to P2 by pressing the up and down buttons, press the setting button again, and set the required calibration temperature by pressing the up and down buttons. In the setting, if the detected temperature value is 0.5°C higher than the actual temperature value, the calibration temperature to be set is -0.5°C. If the detected temperature value is 1°C lower than the actual temperature value, the calibration temperature to be set is 1°C. Detected temperature±corrected temperature=actual temperature. P3 set delay start Enter the internal menu in the same way, switch to P3 by pressing the up and down keys, press the setting key again, and set the required delay time (unit is minutes) by pressing the up and down keys. Delay start is generally used for compressor refrigeration. If it is used for refrigerator freezers, this value needs to be set. According to the size of the compressor back pressure, the general setting value is 3-6 minutes. If you are not used to control the compressor or do not need delay time function, skip this item directly. Package include: 2x Thermostat

Price: 11.99 USD

Location: Whippany, New Jersey

End Time: 2024-11-08T10:09:50.000Z

Shipping Cost: 0 USD