Description: Accepted offers require IMMEDIATE payment! Vintage Yamaha CR-400 Natural Sound Stereo Receiver Unit is in working condition Fully tested and fully functional. WAS Missing two knobs - knobs were found and installed. They are not a perfect match but will work. They do fit loosely however. See the first and last pictures. Cabinet has some wear and tear but nothing major as shown in the pictures. The receiver was acquired at an estate sale. This unit has NOT been serviced. As far as I know, it it still has all original components. The CR-400 has a Microphone input with its own separate Volume control. This allows for mic mixing, which lets you play any signal source, then blend in your voice and even record the results. It has inputs for Phone, Aux and Tape so you can run a iPod through it utilizing the Aux input with the correct adapter (3.5mm to 2 Male RCA Y connector) which runs about 5 bucks on eBay. It also features: Dual FET FM Front End IC and Ceramic Filter FM IF Amplifier IC Multiplex Demodulator Dual Tuning Meters LED Indicators (Power/ FM Stereo) 3-Stage DC Phono Equalizer Mic Mixing DC OCL Pure Complementary Power Amplifier Subsonic Filter Speaker Selection (A, B, A+B) Specifications Tuning range: FM, MW Power output: 16 watts per channel into 8Ω (stereo) Frequency response: 20Hz to 50kHz Total harmonic distortion: 0.5% Damping factor: 40 Input sensitivity: 3mV (mic), 3mV (MM), 150mV (line) Signal to noise ratio: 65dB (mic), 72dB (MM), 85dB (line) Channel separation: 50dB (MM), 50dB (line) Output: 150mV (line), 0.2V (Pre out) Speaker load impedance: 4Ω to 16Ω Semiconductors: 4 x IC, 3 x FET, 38 x transistors, 22 x diodes, 1 x zener diodes, 2 x LED Dimensions: 444 x 158 x 300mm
Price: 145 USD
Location: Phoenix, Arizona
End Time: 2024-10-17T17:37:12.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Loudness: 100Hz:+8dB 10kHz:+5dB
External Dimensions: Width 436 x Height 144 x Depth 300mm
Custom Bundle: No
Phono maximum allowable input (distortion ratio 0.1%): 135mVrms
Load impedance: 4Ω~16Ω
channel separation: 50dB or better (at 1kHz, RMS output)
Tone control: Bass:50Hz、±12dB Treble:10kHz、±10dB
Dynamic power (IHF, 1kHz): 90W(4Ω) 70W(8Ω)
Damping factor (1kHz, 8ohm): More than 50
Input Sensitivity/Impedance (1kHz, at RMS output) AUX1、2、Tuner: 150mV/55kΩ
Effective output 20Hz to 20kHz (both channels driven): 25W+25W(4Ω) 20W+20W(8Ω)
Effective output 1kHz (both channels driven): 28W+28W(4Ω) 22W+22W(8Ω)
Power bandwidth (IHF, distortion 0.5%): 8Hz~70kHz
residual noise: 0.4mV or less
Modified Item: No
Input Sensitivity/Impedance (1kHz, at RMS output) Phono1: 2:3mV/47kΩ
Filter (esp. camera): Low:50Hz(12dB/oct) High:8kHz(6dB/oct)
Weight: 8.0kg
Brand: Yamaha
Input Sensitivity/Impedance (1kHz, at RMS output) Mic: 3mV/40kΩ
Power consumption (Electrical Appliance and Material Control Law): 70W
Supply voltage: AC100V、50Hz/60Hz
Input Sensitivity/Impedance (1kHz, at RMS output) Tape PB A、B: 150mV/55kΩ
Mic maximum allowable input (distortion ratio 0.3%): 400mVrms
Model: Yamaha Cr-400
Effective output 1kHz (single-channel drive): 35W/35W(4Ω) 27W/27W(8Ω)
Intermodulation distortion (at RMS output): 0.1% or less
Country/Region of Manufacture: Japan